Return to Hormann Industrial Sectional Doors home - Windows - Colours

Hormann TAP 40

The Hormann TAP40 is the effectively insulated and highly stable door that allows large volumes of light through. With windows created from Duratec maximum scratch resistant glass, your windows will stay clean and scratch free wash after wash.

If you seek full use of daylight, good thermal insulation and a high level of stability are called for then the Hormann TAP 40 door can meet these requirements threefold; on account of the cold-repelling 16mm thick double glazing, the aluminium extrusions with thermal breaks and the double-skinned PU foam-insulated steel bottom section. This is 100% CFC-free. This combination produces a remarkabl thermal insulation value.

The aluminium extrusion has an overall thickness of 42mm. The outer and inner shells incorporate thermal breaks with glass fibra reinforced polyamide ribs and are at the same time positively bonded. This ensures a high degree of stability and protects the structural fabric.

The bottom section in steel: white aluminium (based on RAL 9006). The glazing frames in aluminium: anodized to DIN 17611m stained in a natrual colour (E6/EV1). Besides this standard surface finish, it goes without saynig that we can also supply the doors in special colours to RAL.

Hormann TAP40 Door Style Configurations

With 52mm rail extrusion as standard for doors up to 5500mm wide.

With 91mm rail extrusion as standard for doors 5510mm wide or more. Doors up to 5500mm wide also available with the 91mm rail extrusion on request.

750mm section bottom section height as standard, also available in 500mm, 1000mm and 1500mm on request.

Technical Details

Size range
Width up to 7000mm
Height up to 7000mm

Resistance to wind pressure
Class 3¹

Water-tightness
Class 3 (70 Pa)²

Air permeability
Class 2 (with wicket door class 1)³

Sound insulation
R = 19 dB⁴

Thermal insulation to EN 13241, annex B EN 12428
U = 3.3W/m²K*
(with wicket door U = 3.5W/m²K*)
*The values refer to a door area of approximately 25m²

¹EN 12424 ²EN 12425 ³EN 12426 ⁴EN 717-1