Rotamatic PL 2 Gate Operators
Electric Gate Operators
Gear Type: Remote Control Operators
The Hormann RotaMatic PL 2 Gate Operator is suitable for double leaf hinged gates. Leaf width from 1500mm up to 4000mm. Max leaf weight 400kg.
Not suitable for commercial use.
Robust electro-mechanical hinged gate operator for single and double leaf hinged doors up to max. 2000 mm high, up to max. 4000 mm wide (per leaf), leaf weight of up to max. 400 kg (per leaf).
An electric lock is required for doors with partial infill.
An electric lock is recommended from a door leaf width of 1500 mm!
Max. 25 door cycles (open/close) per day or 12 parking spaces
24 V DC gear drive with worm gear, protection category of motor IP 44, mains voltage 230 – 240 V AC, 50 Hz, control voltage 24 V DC, push and pull force 2500 N, peak force 2700 N.
In separate housing IP 65, micro-processor control, programming via DIL switches, adjustable power limit, soft start and soft stop (adjustable), integral automatic timer.
One safety device can be connected.
With double-leaf hinged gates one of the leaves can be used as traffic leaf.
Close end-of-travel position can be set with an integrated limit switch
or end stop.
Programmable Open end-of-travel position, i.e. no stop required!
With 4-button hand transmitter HS 4 BS (black) and uni-directional receiver HE 3 BiSecur for the impulseand partial opening functions (status message not possible).
Aluminium/zinc diecast/weather resistant, glass fibre reinforced plastic
From -20°C to +60°C
Scope of delivery:
Coated metal housing for battery (380 x 380 x 210mm)
Battery unit AE 24
Battery charger LG 24
5-Year Manufacturers Warranty.