The Hormann RotaMatic 1 Gate Operator is suitable for single leaf hinged gates.
Leaf width from 1000mm up to 2500mm. Max leaf weight 220kg.

Not suitable for commercial use.

Robust electro-mechanical hinged gate operator for single and double leaf hinged doors up to max. 2000 mm high, up to max. 2500 mm wide (per leaf), leaf weight of up to max. 220 kg (per leaf).
An electric lock is required for doors with partial infill.
An electric lock is recommended from a door leaf width of 1500 mm!

Suitability:
Max. 12 door cycles (open/close) per day or 6 parking spaces

Operator data:
24 V DC gear drive with worm gear, protection category of motor IP 44, mains voltage 230 – 240 V AC, 50 Hz, control voltage 24 V DC, operating mode S2 - 4 minutes, push and pull force 2000 N, peak force 2200 N.

Control electronics:
In separate housing IP 65, micro-processor control, programming via DIL switches, adjustable power limit, soft start and soft stop (adjustable), integral automatic timer.
One safety device can be connected.
With double-leaf hinged gates one of the leaves can be used as traffic leaf.
Close end-of-travel position can be set with an integrated limit switch
or end stop.
Programmable Open end-of-travel position, i.e. no stop required!

Standard equipment:
With 4-button mini hand transmitter HSM 4 including hand transmitter holder and integral 2-channel receiver in 868 MHz. Each hand transmitter factory-coded individually from over 1 trillion combinations.

Housing:
Aluminium/weatherproof, glass-fibre reinforced plastic
Temperature range:
From -20°C to +60°C
Scope of delivery:
Including 1.5 m test run lead and galvanized fitting material
For doors with lifting hinges see accessories.

Installation details to follow...

5-Year Manufacturers Warranty.