The Hormann range of timber doors are either panelled or tongued and grooved in design. The main material used is carefully selected Cedarwood, with its finely figured grain and variation in colour. All timber doors are supplied with a dip immersion coat of Sikkens WP560 Colour re 006 Light Oak; this coating is for temporary protection only.
 

Hormann Timber Up and Over Canopy doors have a single torsion spring shaft fixed to the head frame with cable and rollers running in vertical tracks on the inside frame legs.

Spring and vertical tracks incorporate spring and cable break safety
system conforming to BS EN 12604.

Hormann Timber Up and Over Retractable doors have a multiple spring safety system with tight coils to eliminate the risk of fingers being trapped and conform to BS EN 12604.

Retractable Plus doors are the same as retractable doors but with an increased clear drive through height.

Retractable Plus Gear is not available for doors over 7'6" wide.

Door styles with timber and GRP infills:
Door leaf made of galvanised steel. Powder-coated pre-finished in
Terra brown, based on RAL 8028.
All timber doors have natural / light oak base-coat as standard.

Fully Finished Colour Options available:
(5 year erosion protection).
Walnut
Ebony
Rosewood
Medium Oak
Light Oak
Dark Oak
Golden Oak
Mahogany
Teak
Please Note: South facing doors that are exposed to strong sunlight - Dark colours are NOT recommended as they can store excessive heat and dry out.

Fittings and locking - Round plastic handle on the outside, plastic ‘rotary disc’ on the inside. Special lock with multi-point locking, with profile half cylinder and release button on the inside, 2-point locking by automatic UPVC-latch (adjustable) 4-point locking option is also available for increased security.

Standard Specification - Single doors pre-assembled UPVC rollers and UPVC bushes in all door bearings, buffer stop.

Delivery - Single doors pre-assembled, 1 unit.

Full installation details are provided with the door as well as various components for installing the optional steel fixing frame if ordered. Steel brackets and screws are provided for the fixing frame or timber screws for a timber fixing frame installation - you will only need fixings for installing the steel brackets to your structural opening. All Hormann garage doors are delivered with your chosen operating mechanism factory installed to the door panel and the only item to fix after installing the door is the handle set supplied seperately with the door. The spring is already tensioned on the canopy doors and released by removing a transit screw once the door is installed.

Hormann garage doors are manufactured according to the quality management system DIN ISO 9001 and meet all the requirements of the European Standard 13241-1. Hormann Series 2000 up and over garage doors carry a 10 year guarantee.