Overview > Types Available > SeceuroBar > How To Measure > Installation > Price & Ordering
Commercial Security Grilles - Installing A SeceuroBar
With a SeceuroBar, the system is manufactured to fit as close as possible to the window frame; this will avoid any unnecessary gaps for dust, dirt etc. to collect in. The top and bottom retaining units should be placed up by the window and the fixing positions marked with a pencil. The retaining unit can then be removed and create space to drill the appropriate hole. We recommend that the minimum fitting is 10 x 2" (50mm) countersunk wood screws. It is very important that countersunk screws are used; these will allow greater clearance in the top retaining unit. It is usually necessary to create a small recess directly below the lock position and to allow the bottom fitment to seat correctly. For wider or horizontal applications, the fixing plates can be secured within the retaining unit by using maskin tape or a small amount of silicone sealer (this will eliminate fixing plate movement). Before finally tightening the top and bottom retaining units the end caps should be moved out to the end of the opening, this will provide a neat and even finish to the system.
