Overview > Types Available > SeceuroBar > How To Measure > Installation Guide > Prices & Ordering
Commercial Security Grilles - How To Measure For A SeceuroBar
When measuring for any Seceuro product, it is imperative that all dimensions are given in millimetres to ensure the perfect fit is made. If you require a conversion from inches to millimetres, simply multiply the dimension in inches by 25.4.
PREPARATION
It is important to check during surveying that the opening is suitable for the installation of a SeceuroBar. If the reveal is constructed from solid steel or a cavity then it would be better to face fix the system around the opening.
You must check that the reveal is straight and level.
NOTE: Any deflection of the bottom retaining unit will cause the mechanism to have a loose fit and stick. Packing strips can be used to make the reveal level. If the reveal slopes inwards or outwards, or the top retaining unit is not fitted firectly above the bottom retaining unit, the socket will not lock in the mechanism. The reveal should be levelled up with packing strips and re-measured.
MEASURING
When measuring, it is important that the dimension of the width (shown as A in the picture) is given first, before the dimension of the height (shown as B) to avoid any confusion. You must ensure that tight reveal sizes (in particular the height) are given when ordering. Failure to do this could result in the bars being cut too short and the level of security being offered is compromised.
If the height of the SeceuroBar you require exceeds 1500mm, it will require two rows of spreader bars. Spreader bars are used to reduce the deflection on taller applications and ease removal of bars.
When you have measured the reveal size, continue to the prices and ordering page to view our very competitive prices.
It is worth clarifying that the SeceuroBar is an internal ONLY product and should under no circumstances be installed on the exterior of a building.
