The answer to your selected question is shown below.
Please use the Search tool or the menus on the right to find and select more questions and answers. If you think our response isnt clear, it would be very helpful if you could contact us with the issue so that we can improve this section of our web-site.
Fire Curtains & Shutters
Fire Curtains, Shutters and Doors
The SeceuroFire range currently offers the Flame Curtain and Flame Shutter that also doubles up as a security solution. The SeceuroFire is an automatic Flame Curtain that has a 2 hour rating and is the perfect solution where protection is required but without compromising on the aesthetics of a building.
The SeceuroFire Flame Shutter is the perfect solution where fire protection is needed alongside security. Built with the same attention to details as the SeceuroShield range the Flame Shutter is available with a 1, 2 or 4 hour rating offering a solution for most requirements.
Both the Flame Curtain and the Flame Shutter have been tested and assessed by Exova Warringtonfire. During testing, the product is fitted on the furnace side replicating the most severe conditions of a fire. The temperature of the furnace is then increased to 1000°C at a rate defined by the product standards.
Our SeceuroFire products have been rated at 1, 2 and 4 hour for our fire shutter range and a 2 hour rating for our fire curtain.
![]() |
![]() |
![]() |
![]() Flame shutters are similar to conventional steel slatted and galvanised steel roller shutters that operate vertically, closing in the event of a fire. Our fire shutters are available in safety ratings of up to 4 hours. One of the main benefits of Flame shutters is there ability to act as a means of physical security during normal use and a fire safety shutter in the event of a fire. Warranty All SeceuroFire products are guaranteed against defect of material or workmanship by SWS UK, subject to correct installation, maintenance and operation, for a period of 12 months from the date of purchase. Flame Curtain Specifications: BS476:Part 22 1987 BSEN1634-1:2008 2 Hour Fire Rating Flame Shutter Specifications: BS476:Part 22 1987 BSEN1634-1:2008 Available in 1, 2 and 4 hour rating |