SeceuroDoor 100 Fast - 3 Phase - 415v Direct Drive
High Speed Roller Doors
Max width 7m Max Height 7m
Material: Steel
Enquiry Form
Call Us
Email Us
Web Price: £3,957.00
(Excluding VAT and £4,748.40 Inc. VAT)
1
Ordering
Web Price:
£3,957.00
(Excluding VAT and
£4,748.40
Inc. VAT)
NEED HELP? Call us on 01933 448 850
or click here to connect via our Live Chat
- Description
- Application
- Specification
- Measure
Description
The roller door which everyone would be happy operating every day…. The biggest complaint we hear about existing and older roller doors is how slow they are to open and close. Even new roller doors using cheap, low powered and high geared motors will be super slow to open and close. We are talking around 60 seconds for a cheap 5m high roller door to open, compared to around 18 seconds for one of our Seceurodoor Fast doors (adjustable settings for the motor dictate the speed). About 3-4 times faster, but not 4 times the price!
This door is insulated, and it has to use the strong double skinned curtain to enable the forces exerted by the high powered motor to be absorbed. Think about it now though, you have a high speed operating door, which is also insulated for cold and heat and sound and also considerably stronger all round, so has better security and it isn't noisy in high winds like so many rattly roller doors can be!
A high quality, double skinned steel, industrial ‘Traditional’ build, insulated roller shutter door, using a three phase, 415V, direct drive, adjustable speed industrial GfA electric motor for operation. This is an excellent door package with the strength, security, wind resistance, insulation offered by the double skinned curtain along with the biggest winning factor of faster opening speeds from a GfA motor with adjustable speed settings. Consider this door for any medium to large openings to have one of the best roller shutter doors you can and all the convenience and savings through higher performance all day long
GfA offer the very best industrial roller door motors, with leading edge technology and excellent, reliable, intelligent control options. Electric drive 415V motor roller doors are usually specified for medium to higher usage openings with more average daily use.
The slats are 95mm high in profile and 20mm deep front to back with a foam injected core offering more strength and performance over any standard single skin slat. The slats are galvanised steel as standard for maximum protection.
This is a great roller shutter door for so many applications and worth looking at over a single skin basic shutter as the extra cost is minimal compared to the many benefits offered.
ALL SeceuroDoor products are:
- CE or UKCA marked. Purchasing any product for commercial use requires full compliance with UK regulations. Approved LPCB products also available.
- Manufactured within an ISO9001 and ISO14001 certified UK company
- Made to measure as standard for a perfect fit
- Using the highest quality components and electric motor drives
Our Insulated Commercial Shutter combines all the qualities of the very robust SeceuroDoor 75 but with the added benefit of insulation and also a quieter curtain in high winds because the slats sit tighter in the guides with more weight and depper profile.
This insulated steel profile is especially resistant to damage and reduces deflection. With the option of interior and exterior identical colour coating our insulated shutter can easily be blended into the look of any building yet is also available with a galvanised finish.
Thermal and Acoustic Insulation
Minimal thermal bridges and the use of fine-pored PU rigid foam infill ensure good thermal nsulation whilst curtain and sealing technology used around the entire shutter reduce noise from both inside and outside.
Heat transmission performance for the CDC free insulation infill is 0.553 W/m2K
Max width 7000 mm
Max height 7000 mm
Max area 49 m2
Your choice of motor
Can be powder coated any colour*, *the maximum width for powder coating is 6500 mm
Choice of 4 guide arrangement options
Standard guide angle is 100 mm x 50 mm
Vision option available –
200 mm x 55 mm Clear Perspex Vision Panel with a minimum of 200 mm space in between
Application
Typical use for this 100mm insulated door would be on any commercial or industrial building, factory, workshop or warehouse where there were around 30 - 40 operations per day. This is with the very basic motor however and being a high speed motor will also mean it is a high rated motor to operate many more times a day than normal. Busy workshop, larger factories, 24 hour warehouses, any heated building.
The SeceuroDoor 95 Fast offers high levels of performance for any building where the door needs to be kept closed as much as possible all the time. The insulation and high speed operation go hand in hand to offer the best chance of a stable internal climate in the building
The insulated properties offer obvious benefits to many buildings to reduce energy use, but also benefit from a stronger curtain and reduced acoustic transmission to the outside and inside too.
The roller shutter includes an internal manual override facility as standard, with a chain pulley override integrated with the motor and on the same side as chosen.
The standard build on this model uses a 95mm deep and 20mm thick galvanised steel double skin curtain available in various colour finish options.
Specification
Colours
This roller door is available with the curtain galvanised steel or prefinished in a powdercoat finish to the outside face only.
All colours are supplied in a satin finish as standard. Matt and gloss are available, please email or call for price details.
As totally standard and used by many people, depending on the roller door location, you can have the steel curtain in its natural galvanised steel finish.
We can offer the door in special colours other than the ones showing in our online shop options and of course you can mix and match the guides, hood cover and curtain if required, please email or call for details and prices.
Controls
The electric direct drive 415V motor can be controlled by various methods:
The most basic method is an internal wall mounted push button station with a hold to run logic. You stand and hold the button firm for the duration of the opening or closing cycle and this way no safety edge or beam systems are legally required keeping the costs to a minimum.
Of course you must be able to enter the building via another door for this method.
The second option is a wall mounted control panel which can be programmed to have an impulse operation meaning you simply push the up or down button momentarily and the door will auto operate and has safety edge detection built in with the bottom T rail section to stop if an obstacle is met.
The third option is the same as option 2 above, but with the addition of remote control handsets and we supply 2 handsets as standard, but you can have as many as you need. The safety system is still in place to prevent closure onto an obstacle. If the door is adjacent to any public pathway or road we suggest additional safety with infra red beams to further enhance the safety.
Being a high speed door model usually means customers often require auto opening from radar detection or similar. We can offer expanded access controls for this door but it is best to speak to us or email with your requirements.
Measure
The ordering sizes for all our ‘Traditional’ build roller shutter doors are the actual daylight opening sizes In-between the side guides and underneath the endplates (actual guide height). Make sure you understand the guide and angle widths either side and the endplate size in relation to the door size ordered.
For the perfect internal face fitting situation behind an opening these ordering sizes are effectively the same as the aperture size, but be aware there is always a small hang down on the bottom slat of the curtain when fully open, which affects the final drive through height. If final drive through height is critical for you then please allow for this extra height to be added.
Samson Doors will always provide a final detailed door drawing for you to check and sign off with us before any manufacturing commences.
The Traditional build on this roller shutter door incorporates steel guides and track angles with optional arrangements to suit the fixing points on site. A ‘Traditional’ build roller shutter will use steel guides, channels, endplates and optional hood cover. Using steel components means the door can be larger than the Continental style roller shutters.
The endplates and hood cover size will vary depending on the height of the door so please be aware to check the final drive through height and endplate size.
An emergency manual override is included as standard with the access underneath the endplate on the motor side as facing looking at the endplate side of the shutter. Other positions are available on request.
Try some of our best sellers
