SeceuroDoor 95 Fast - 3 Phase - 415v Direct Drive Motor
High Speed Roller Doors
Max width 7m Max Height 7m
Material: Steel
Enquiry Form
Call Us
Email Us
Web Price: £4,761.00
(Excluding VAT and £5,713.20 Inc. VAT)
1
Ordering
Web Price:
£4,761.00
(Excluding VAT and
£5,713.20
Inc. VAT)
NEED HELP? Call us on 01933 448 850
or click here to connect via our Live Chat
- Description
- Application
- Specification
- Measure
Description
The roller door which everyone really wants if they think on it…. The biggest complaint we hear about existing and older roller doors is how slow they are to open and close. Even new roller doors using cheap, low powered and high geared motors will be super slow to open and close. We are talking around 60 seconds for a cheap 5m high roller door to open, compared to around 15 seconds for one of our Seceurodoor Fast doors (adjustable settings for the motor dictate the speed). 4 times faster, but not 4 times the price!
This door is insulated, and it has to use a double skinned curtain to enable the forces exerted by the high powered motor to be absorbed. Think about it now though, you have a high speed operating door, which is also insulated for cold and heat and sound and also considerably stronger all round, so has better security and isn't noisy in high winds like so many rattly roller doors can be.
A high quality, double skinned steel, industrial ‘Traditional’ build, insulated roller shutter door, using a three phase, 415V, direct drive, adjustable speed industrial GfA electric motor for operation. This is an excellent door package with the strength, security, wind resistance, insulation offered by the double skinned curtain along with the biggest winning factor of faster opening speeds from a GfA motor with adjustable speed settings. Consider this door for any medium to large openings to have one of the best roller shutter doors you can and all the convenience and savings through higher performance all day long
GfA offer the very best industrial roller door motors, with leading edge technology and excellent, reliable, intelligent control options. Electric drive 415V motor roller doors are usually specified for medium to higher usage openings with more average daily use.
The slats are 95mm high in profile and 20mm deep front to back with a foam injected core offering more strength and performance over any standard single skin slat. The slats are galvanised steel as standard for maximum protection.
This is a great roller shutter door for so many applications and worth looking at over a single skin basic shutter as the extra cost is minimal compared to the many benefits offered.
ALL SeceuroDoor products are:
- CE or UKCA marked. Purchasing any product for commercial use requires full compliance with UK regulations. Approved LPCB products also available.
- Manufactured within an ISO9001 and ISO14001 certified UK company
- Made to measure as standard for a perfect fit
- Using the highest quality components and electric motor drives
Our Insulated Commercial Shutter combines all the qualities of the very robust SeceuroDoor 75 but with the added benefit of insulation and also a quieter curtain in high winds because the slats sit tighter in the guides with more weight and depper profile.
This insulated steel profile is especially resistant to damage and reduces deflection. With the option of interior and exterior identical colour coating our insulated shutter can easily be blended into the look of any building yet is also available with a galvanised finish.
Thermal and Acoustic Insulation
Minimal thermal bridges and the use of fine-pored PU rigid foam infill ensure good thermal nsulation whilst curtain and sealing technology used around the entire shutter reduce noise from both inside and outside.
Heat transmission performance for the 95 mm insulated Lath: Centre = 1.1 W/m2
K, Quirk = 3.2 W/m2 K
Max width up to 7000 mm
Max height up to 7000 mm
Max area 44 m2
Choice of 4 guide arrangement options
Standard guide angle is 100 mm x 50 mm
Vision option available: 160 mm x 58 mm Clear Perspex
Vision Panel with a minimum of 170 mm space in between
Wind class rating: Class 5
Application
Typical use for this 95mm insulated door would be on any commercial or industrial building, factory, workshop or warehouse where there were around 30 - 40 operations per day. This is with the very basic motor however and being a high speed motor will also ean it is a high rated motor to operate many more times a day than normal.
Busy workshop, larger factories, 24 hour warehouses, any heated building.
The SeceuroDoor 95 Fast offers high levels of performance for any building where the door needs to be kept closed as much as possible all the time. The insulation and high speed operation go hand in hand to offer the best chance of a stable internal climate in the building
The insulated properties offer obvious benefits to many buildings to reduce energy use, but also benefit from a stronger curtain and reduced acoustic transmission to the outside and inside too.
The roller shutter includes an internal manual override facility as standard, with a chain pulley override integrated with the motor and on the same side as chosen.
The standard build on this model uses a 95mm deep and 20mm thick galvanised steel double skin curtain available in various colour finish options.
Specification
Colours
This roller door is available with the curtain galvanised steel or prefinished in either a powdercoat finish which would be the same colour each side of the slat. All colours are supplied in a satin finish as standard. Matt and gloss are available, please email or call for price details.
As totally standard and used by many people, depending on the roller door location, you can have the steel curtain in its natural galvanised steel finish.
We can offer the door in special colours other than the ones showing in our online shop options and of course you can mix and match the guides, hood cover and curtain if required, please email or call for details and prices.
Controls
The electric direct drive 415V motor can be controlled by various methods:
The most basic method is an internal wall mounted push button station with a hold to run logic. You stand and hold the button firm for the duration of the opening or closing cycle and this way no safety edge or beam systems are legally required keeping the costs to a minimum. Of course you must be able to enter the building via another door for this method.
The second option is a wall mounted control panel which can be programmed to have an impulse operation meaning you simply push the up or down button momentarily and the door will auto operate and has safety edge detection built in with the bottom T rail section to stop if an obstacle is met.
The third option is the same as option 2 above, but with the addition of remote control handsets and we supply 2 handsets as standard, but you can have as many as you need. The safety system is still in place to prevent closure onto an obstacle. If the door is adjacent to any public pathway or road we suggest additional safety with infra red beams to further enhance the safety.
Being a high speed door model usually means customers often require auto opening from radar detection or similar. We can offer expanded access controls for this door but it is best to speak to us or email with your requirements.
Measure
The measuring, pricing and ordering dimensions for any electric roller shutter door with an industrial electric motor drive is by the OPENING WIDTH and GUIDE HEIGHT excluding the guides for the width and endplates for the height. See measuring diagram below.
This is regardless of whether it is a single or three phase electric motor system.
OPENING WIDTH inbetween guides = Ordering Width
GUIDE HEIGHT with endplates excluded = Ordering Height
The overall width at high level where the endplates are fitted will be wider than the overall guide width and can be wider still, depending on the choice of inboard or outboard motor set up.
The electric motor side with an outboard motor required more side room than the non motor side at endplate level.
Chain drive or direct drive motor choice will vary the width required for the motor.
The emergency manual override included as standard is the same side as the motor internally and is accessed directly underneath the endplate. Other positions are available on request.
The endplate size will vary depending on the door model and height and therefore the size of the curtain roll when fully opened and rolled up.
The Traditional build roller shutter door uses steel guides and angle profiles for installation which can all be specified to suit different installation requirements.
Face Fit - Behind the Opening (recommended for Traditional build industrial doors)
Most industrial roller shutter doors are installed to the inside face of the aperture and in a perfect scenario your daylight opening dimensions are the inbetween guides and underneath end plate dimensions, bearing in mind ANY roller shutter will always have a ‘hangdown’ when opened fully making the final drive through slightly less than the height of the guides. This is normal and varies on different models depending on the curtain specification. If your opening drive through height is critical speak to us first to determining the best height to order.
Reveal Fit - Inbetween the Opening
Some roller shutter doors are installed inbetween the aperture and this is where the electric tube motor roller door arrangement is best used, as all components are inboard from the ordering dimensions. You can install ANY roller shutter door inbetween an opening, but industrial motor driven models require some additional steel work to make them fit inbetween properly.
Traditional Build Industrial Motor Driven Arrangement and Ordering Dimensions
(showing outboard direct drive motor arrangement)
(showing outboard direct drive motor arrangement)
Try some of our best sellers
