Robust secur dor pas 24 steel pas24 steel doorsets

Secur-Dor 24 is a high quality steel doorset for use in many applications, commercial or domestic and offers compliance with a requirement from an increasing number of architects and designers looking to ensure the very best design in any given building.
The Secur-Dor is a made to measure steel doorset with addtional features possible on request over and above being an internal or external dorset with PAS24 certification. The size, colour, hardware, insulation value and other aspects can all be specified to suit many applications.

The Secur-Dor PAS 24 approved doorsets are to combat the threat of attack and burglary in social housing and new-build designs, meaning improved security and peace of mind.

The PAS 24 is an attack test standard for doorsets which certifies that a particular door, frame, lock and hardware set has withstood a series of controlled physical tests based on common methods of burglary. These doorsets provide the minimum police requirement for ‘Secured by Design’ dwellings. The PAS 24 standard is awarded by a UKAS accredited certification body and replaces a number of earlier standards with effect from August 2012. This standard assures the purchaser that the product has been manufactured to an approved, and verified, standard.

Robust SECUR-DOR has been successfully tested to Warrington Exova Certisecure STS 202 and PAS 24 standards, and is included in the ‘Secured by Design’ scheme; the official UK Police initiative to ‘design out crime’.

SECUR-DOR 2 (STS 202 BR2 & PAS 24) and SECUR-DOR 3 (STS 202 BR3) are both included on the ‘Secured by Design’ scheme.

SECUR-DOR 4 is tested to the Euopean Security Standard DD ENV 1627:1999 and further enhanced for blast resistance – tested to EXR2 and EXR3 of the BS EN 13124-2:2004 Explosion Resistance standard.

Any building where PAS24 and secure by design compliance is required. Domestic or commercial applications.

 There are 3 standard levels of certification for the Secur-Dor steel doorset as set out below:

VERSIONS		SECUR-DOR2	SECUR-DOR3	SECUR-DOR4
We offer three versions – each providing increased security (latched or unlatched):		Security Door Tested to STS202 BR2 & PAS24 protect low to medium risk properties from determined opportunist attempts at forced entry using a variety of hand tools. They are particularly suitable as apartment doors for residential and social housing.	Security Door Tested to STS202 BR3 Protect medium risk residential or commercial properties from attempts at forced entry, with little regard for noise, using heavy hand tools.	Security and Blast Door Tested to ENV 1627 Level 4 Protect medium to high risk properties from experienced attempts at forced entry, regardless of noise, using heavy hand and battery tools or explosives.
DOOR LEAF
Production Sizes:		All SECUR-DOR doors are custom made. The maximum size varies according to fire rating as shown below for Mild Steel and 316 or 304 Stainless Steel.
Single Doors Latched (Single Swing)	Max Width mm	1300	1300	1250
	Max Height mm	2800	2800	2800
Double Doors (Single Swing - Latched or unlatched, equal or unequally split)	Max Width mm	2700	2700	2600
	Max Height mm	2800	2800	2800
Thickness:	mm	48	55	48
Material:		1.5mm corrosion resistant Zintec/Aluzinc sheets as standard	2mm corrosion resistant Zintec/Aluzinc sheets as standard	1.5mm corrosion resistant Zintec/Aluzinc sheets as standard
Infill:		Filled with mineral wool and integral steel stiffeners.	Filled with mineral wool and integral steel stiffeners.	Solid timber cored with internal stainless steel steel anti-attack skin
Construction:		Doorblade manufactured from two 1.5mm sheets lockformed together, by bonding two steel skins around a rigid core. A total steel armour thickness of 3 - 4mm.	Doorblade manufactured from two 2mm sheets lockformed together, by bonding two steel skins around a rigid core. A total steel armour thickness of 4mm. Fitted with antitamper hinges.	Doorblade manufactured from two 1. 5mm sheets lockformed together, by bonding two steel skins around a rigid core. Additionally fitted with a 1.5mm stainless steel sheet to the internal face of the outer skin and a solid timber core. Fitted with a full length continuous hinge. A total steel armour thickness of 4.5mm. Fitted with integral lock box.
DOOR FRAME		SECUR-DOR2	SECUR-DOR3	SECUR-DOR4
Construction:	Material:	Folded and welded from 1.6mm Zintec/Aluzinc.	Folded and welded from 2mm Zintec/Aluzinc.	Folded and welded from 3mm Zintec/Aluzinc.
	Sub-Frame:	Fully welded, variable subframe supplied as standard to accommodate site tolerance of -0/+30mm. The sub-frame providing additional protection to the fixings against jemmys.	Folded and welded from 2mm Zintec/Aluzinc. Fully welded, variable sub-frame supplied as standard to accommodate site tolerance of -0/+30mm. Complete with Anti-Crush plate. The sub-frame providing additional protection to the fixings against jemmys.	Specially modified, variable sub-frame supplied as standard to accommodate site tolerance of -0/+30mm. The sub-frame providing additional protection to the fixings against jemmys.
	Fixings:	Four specially modified Class 13 stainless steel hinges with four security dog bolts for security.	Four Class 13 stainless steel dog bolt hinges recessed and specially modified to prevent pin extraction. Plus two solid ball round dog bolts to increase resistance to prising.	Stainless steel dog bolted continuous hinges for additional security.
	Infill:	Mineral wool	Mineral wool
Profile: (see diagrams below)		A, B, C	A, B, C, D	C, D

Full installation details are provided with every door supplied including a 'fixing pack'

All Steel Doors manufactured using a base material of ‘Magnelis’ carry a 10 year anti-corrosion warranty in any locations classed as C1 – C3. Any locations classed as C4 or C5 would carry a 5 year and 3 year warranty respectively.
Anti-corrosion warranty applies to the door leaf only unless we are informed prior to quotation and manufacturing and an additional protection is offered for components not available in magnelis such as the vision panels, louvre panels, etc… Any doors manufactured in Aluzinc carry a 24 month anti-corrosion warranty unless an enhanced PPC finish is requested and applied.
All doorsets carry a 24 month warranty against manufacturing defects.
All warranties are subject to site maintenance being carried out at regular intervals as outlined in the O&M manual.