- Description
- Application
- Specification
- Installation
- Warranty
- Measure
Carteck XL Standard Ribbed Insulated Sectional Garage Door
The Carteck XL Standard Ribbed insulated sectional garage door is engineered to provide a classic and timeless aesthetic while delivering the heavy duty performance required for extra wide garage openings. Spanning up to 6250 mm wide, this door combines the strength of uprated XL hardware with excellent thermal insulation and reliable automatic operation.
Aesthetics of the Standard Ribbed design in Trend Colours
The Standard Ribbed layout offers a classic multi ribbed aesthetic that is particularly effective on extra wide garage doors. The evenly spaced horizontal lines run across each panel, breaking up the large surface area and creating a visually balanced and structured appearance that prevents the door from looking too plain or industrial. When finished in one of the extensive Trend Colours, the door can either make a bold contemporary statement or blend sympathetically with traditional architecture. This vast colour palette gives you complete freedom to match your home exterior perfectly, ensuring the garage enhances the overall property frontage.
Built for extra wide openings
When covering expansive spans, standard hardware is not enough. The Carteck XL door is built around a heavy duty chassis designed to keep the structure rigid and secure over long widths.
- Rear mounted torsion spring system calibrated to balance the heavier weight of XL panels.
- Reinforced roller brackets and panel profiles built in to prevent sagging.
- Galvanised steel components designed to cope with increased operating loads.
- Precision ball bearing rollers running in robust steel tracks for smooth and quiet operation.
The result is a large insulated steel sectional door that feels incredibly solid, resists flexing and moves with a controlled and consistent action.
Stable and controlled movement
The lifting gear keeps the door perfectly balanced throughout its travel, protecting the structure and helping the motor run efficiently without unnecessary strain.
- Carefully balanced torsion springs reduce strain on the operator and physical fittings.
- Even lifting support across the entire span helps maintain panel alignment and joint integrity.
- Integrated safety monitoring stops and reverses the door immediately when it encounters an obstacle.
You simply press a button and the door moves in a measured and predictable way, even at the maximum XL width.
Insulation for large openings
The size of an XL door means it forms a large part of your garage exterior, making thermal performance a priority. The standard ribbed door is built to keep the elements at bay and improve overall energy efficiency.
- Forty millimetre thick double skinned steel panels filled with a rigid polyurethane foam core.
- High performance sealing system around the entire perimeter and between the panel sections.
- A deep EPDM rubber bottom seal that adapts to minor floor variations to keep out dust, debris and driven rain.
This insulation is particularly useful where the garage is attached to the house, used as a workshop or forms part of a wider hobby space.
Automation specified for XL doors
A door of this magnitude requires a powerful and intelligent motor to operate safely. The XL standard ribbed comes fully automated as standard, ensuring effortless access.
- Powered by the high output CarTeck DRIVE motor explicitly selected for large and heavy doors.
- Built in safety sensing that stops and reverses when resistance is detected.
- Compatible with remote transmitters, internal wall controls and secure external keypads.
If your opening is larger than the usual sectional sizes and you want strength, excellent insulation and a classic multi ribbed appearance, this model is designed to meet that exact requirement.
The Carteck XL Standard Ribbed insulated sectional door suits a wide range of situations where a single expansive door is required but a premium domestic look remains essential.
- Large single garages that require significantly more width than standard doors can provide.
- Wide double garages where one continuous uninterrupted opening is more practical for parking.
- Garages housing multiple vehicles or car collections that benefit from maximum clear width.
- Attached garages where superior insulation is desirable across a very large opening.
- New build and refurbishment projects requiring a wide automated door with a classic linear style.
Samson Doors can advise on layout, structural suitability and precise sizing for specific projects so that the chosen door is correctly matched to your opening.
Specifications – Carteck XL Standard Ribbed Insulated Sectional Garage Door
Size range
- Maximum XL width up to 6250 mm.
- Typical maximum height up to around 2500 mm depending on configuration.
- Suitable for large single openings, wide double garages and multi bay layouts.
- Available in an extensive range of standard sizes.
- Made to measure XL doors can be produced on request. Please contact Samson Doors with your project details.
Door construction
- Type: automatic insulated sectional garage door.
- Design: standard ribbed horizontal profile for a classic, textured appearance.
- Leaf: double skinned steel sections with a polyurethane foam core.
- Panel thickness: 40 mm insulated sections.
- Panel joints: interlocking finger safe joints with integrated seals.
- Frame: galvanised steel frame legs with optional colour matched frame and head capping.
Thermal performance and weather protection
- Typical insulated panel U value around 0.56 W/m²K.
- Typical complete fitted door U values around 1.3 to 1.5 W/m²K depending on the exact size and installation.
- Forty millimetre insulation helps reduce heat loss across wider openings.
- Perimeter sealing with vertical frame seals, a head seal and seals between the panel sections.
- Bottom seal in EPDM rubber which settles onto the floor and takes up minor irregularities.
- Engineered for high performance in air permeability, resistance to wind load and protection against rain.
Lifting gear and hardware
- Spring system: rear mounted torsion springs as standard on XL models.
- Hardware: heavy duty roller brackets and reinforcing profiles for XL door weights.
- Rollers: ball bearing rollers running in steel tracks for smooth and low noise operation.
- Guides and tracks: vertical guides and horizontal overhead tracks providing true vertical lift.
- Finger safe joints to reduce the risk of trapping at the panel interfaces inside and out.
Electric operation
- Supplied as an automatic insulated sectional door.
- Operator: high output rail drive unit selected specifically for XL sizing and weight.
- Power: 13 amp single phase supply required.
- Controls: normally supplied with remote handsets, with optional internal push buttons and external keypads.
- Safety: integrated force monitoring with automatic reversal when an obstruction is detected.
Finishes, colours and options
- Surface: standard ribbed profile offered in Smooth, Woodgrain, Stucco and Micro Profiled textures.
- Colours: A vast selection of 44 colour options featuring the popular Trend Colours range, classic white, and realistic wood effect finishes like Golden Oak and Rosewood.
- Glazing: a choice of window designs and layouts within the standard ribbed range to add natural light if required.
Installation requirements
- Fitting positions include behind the reveal or between reveals where the structure allows.
- Minimum headroom above the opening is required for the torsion shaft, cable drums, horizontal tracks and operator boom.
- Minimum side clearance is needed for frame legs, brackets and fixings.
- Suitable for installation on common garage structures including masonry, concrete, blockwork and timber framing.
Installation Instructions provided with every door.
Installation Guidance – Carteck XL Standard Ribbed Insulated Sectional Garage Door
General site preparation and clearances
Installation should always be carried out by an experienced professional familiar with large sectional garage doors. Before ordering, all key dimensions including clear width, clear height, headroom and side clearance must be measured accurately. The walls, lintel and ceiling or roof structure must be sound, reasonably flat and capable of taking the substantial fixing and operating loads. Additionally, the floor threshold should be as level as possible so the rubber bottom seal makes good contact. Because the torsion spring shaft is positioned internally above the opening, a defined headroom clearance is required for the shaft, cable drums and the start of the horizontal track runs. Sufficient sideroom is also needed on each side to accommodate the vertical frame legs, tracks and mounting brackets.
Frame, track and torsion spring assembly
The vertical frame legs are fixed either behind or between the reveals depending on the chosen mounting position and the building structure. Horizontal tracks are then aligned with these vertical guides and secured to the ceiling or roof structure using suitable hangers. It is essential that all tracks are set level, parallel and at the correct spacing to allow free travel without binding. The rear mounted torsion spring system features a shaft fixed on strong brackets anchored to the internal lintel structure. Springs are specifically selected and adjusted to balance the XL door size and weight, with lift cables running from the bottom corner brackets to the drums on the shaft to ensure even lifting across the wide span. Spring adjustment is a safety critical task that must only be carried out with the correct tools by trained personnel.
Electric operator setup and commissioning
The XL door comes with a compatible electric rail drive operator designed to handle the increased door mass. The operator head is usually fixed to the ceiling, with the drive rail running centrally above the door and connecting to the top door section via a carriage arm. This requires a standard 13 amp single phase power supply installed to current electrical standards. Before connecting the motor, the installer will check the door on manual operation to confirm smooth and balanced movement, ensuring all panel joints, hinges and rollers are correctly seated in the guides. Once powered, several setup cycles are run to fine tune the open and close limits. Safety functions, including force monitoring and the auto reverse mechanism, are rigorously tested at this stage using a suitable obstruction to confirm correct and safe operation.
Ongoing maintenance and care
Because of the sheer size and weight of the Carteck XL sectional door, regular professional servicing is strongly recommended to maintain safe operation and long term reliability. Structural fixings and track supports should be inspected periodically for tightness and any visible damage. Moving parts such as rollers and hinges will require occasional lubrication with an appropriate light oil or manufacturer approved product. Keeping the door panels and weather seals clean from dirt and debris will also preserve the high quality Trend Colour finish and ensure smooth running. Any major adjustments or work on the torsion springs and other high load components must always be carried out by qualified service engineers.
Warranty Cover – Carteck XL Standard Ribbed Sectional Doors
Carteck insulated sectional garage doors supplied by Samson Doors are backed by comprehensive Teckentrup warranty cover on key components, provided the door is installed correctly and used within the specified operating limits for normal domestic use. This gives you peace of mind that your investment is protected over the long term.
The panels are covered by a ten year manufacturer guarantee against rust penetration from the inside to the outside, as well as a ten year guarantee against the separation of the steel outer skins from the inner foam core. Floor seals, intermediate seals, side seals and lintel seals are also protected by a ten year guarantee against rotting. Furthermore, all non moving frame parts benefit from a ten year guarantee covering material and manufacturing defects where such faults make the parts unusable or seriously impair their intended function.
Moving parts and hardware are subject to a five year manufacturer guarantee. This includes the SLX and GSA Vision windows, rollers, hinges, cable pulleys, lifting cables and standard springs, based on a maximum of five opening and closing cycles per day. Polymer and aluminium window units are covered by a separate two year guarantee. If a coastal paint upgrade is specified for your Trend Colour finish, there is a three year manufacturer guarantee protecting against peeling and blistering on the external face of the panels, though normal colour fading, staining and bleed from hardware remain excluded.
This warranty cover applies exclusively to qualifying Carteck sectional doors purchased in the United Kingdom through the authorised distribution route and operated within the stated duty cycles. To validate a claim, a completed warranty document and a dated sales invoice are required as proof of cover. Please note that costs associated with removal, re installation, transport and postage are not included. For the complete current warranty conditions and ongoing maintenance requirements, please refer to the official Teckentrup documentation or contact the Samson Doors team for advice before ordering.
*If fitting between the opening, please deduct 180mm from the opening width to determine the ordering width.
Deduct 120mm for manual doors and 140mm for electric operation (unless the additional fitting bracket is purchased then 120mm applies) from the opening height to determine the ordering height.
