Fort fort medium rib horizontal ral colours steel up and over garage doors

 Ideal for all residential applications.

All the Fort steel one piece up and over doors have a strong steel sub chassis with internal bracing plates to ensure the best rigidity of the door panel.

We recommend that any steel up and over garage door is always ordered with a steel fixing sub frame for the best overall results and tolerances.
Timber frames are OK but the price and performance of the steel sub frame makes it not worth bothering with a timber sub frame, which needs treatment or painting once fitted.

Operating Mechanism
The doors are sold fitted with either a canopy or retractable operating mechanism, depending on your requirements.
In general terms the canopy door is used for the smaller single sizes and when the door is only to be manually operated. (Sizes up to 2438mm wide)

The retractable door mechanism is for larger sizes and when you want to have an electric operator fitted.

Handle and Locking
All the Fort up and over doors feature a cable operated locking latch system, operated via the central position handle
Option of 4 point locking for any manual operated door if required for extra security.

A black nylon handle is fitted as standard,  can order the door without a handle, but this should only be for when installing with an electric operator, which can then provide the locking when closed

Colours
18 standard low gloss powdercoat colour finishes are available when ordering and this finish is on both sides of the door panel with the same options

for the steel fixing sub frame. You can have Any Ral colour finish for extra cost, please enquire with the colour reference required.

White RAL 9016
Jet Black RAL 9005
Anthracite Grey RAL 7016
Traffic Grey RAL 7042
Window Grey RAL 7040
Light Grey RAL 7035
Light Blue RAL 5012
Signal Blue RAL 5005
Steel Blue RAL 5011
Fir Green RAL 6009
Moss Green RAL 6005
Chartwell Green BS 14 C 35
Brown RAL 8017
Mahogany Brown RAL 8016
Clay Brown RAL 8003
Terracotta Brown RAL 8004
Ruby Red RAL 3003
Ivory RAL 1015

1.Warranty Period.

A warranty covering the safe and reliable operation of the garage door for a period of 10 years from the date of purchase is given to the original purchaser.

The purchaser is given a 2 year warranty for all springs; tracks; rollers; and hinges for normal use, whereby normal use constitutes no more than 5 operations (open/close) per day. We recommend that they are inspected annually by a competent engineer. The warranty period for replacement parts is 6 months or for the remainder of the warranty period.

2. Requirements.

Warranty is valid in the country where the garage door was purchased.

The product must have been purchased through one of our authorised partners and a barcode and receipt of purchase provided.

The warranty only covers damage to the garage door.

3. Performance.

During the warranty period we will rectify defects to the Fort product that can be proved to be material or manufacturing faults. At our discretion we will either exchange; repair; or reduce the price. We will not accept any costs for dismantling; installation; or delivery.

The warranty does not cover damage caused by:

Improper transport and fitting.

Repairs by non-qualified or non competent individuals.

External influences such as fire, water, alkaline solutions, acid, bird droppings or abnormal atmospheric pollution.

The use of non Fort Doors parts without the approval of the manufacturer.

Additional Information

It is a fundamental condition of this guarantee that the product has been installed, maintained and serviced correctly and is used solely for the purpose for which it was designed.

Incorrect installation, maintenance and service will invalidate this warranty.

The door must be kept in a clean condition and free from impact damage.

Fort Pull Handles S/S Care and Maintenance

Fort Up and Over garage doors come with pull handles to the front panel as standard.

The pull handles are made using grade 304 Stainless steel for use externally and internally in heavily sanitised areas such as kitchens and washrooms. 

Like all steel, failure to keep the item clean can cause surface blemishes and what looks like a major product failure and rusting.

You will often find marks appearing in the winter when the roads have been gritted, salt on the surface are all steel products arch enemy.

If your pull bars develop small blemished areas during December, January and February in particular then you should wash them off using cold water and washing up liquid, you can use a cream cleaner like CIF rubbed lightly to remove the blemishes.

If you have them appear it means you have salt on the surface and need to increase the frequency of the door washdown.

Please remember all stainless steel can blemish even knives and forks in a dishwasher because salt is used as a scrubbing agent, wiping blemishes off with a cloth is standard practice and you should treat the door bars the same, clean and wipe regularly. 

If you live close to the sea or estuary you should apply a light oil after washing once a month to keep the item clean and fresh. 

 Frame sizes do not allow for any fitting tolerances, please include if required.