DescriptionThe Robust Outa-Dor is a high quality, made to measure steel doorset for use in a wide range of External applications for almost any building. The Outa-Dor can be tailored to your needs and give you a hinged steel doorset of high quality, with the specification and performance required to tackle whatever you require the door to achieve. Whether that is for security of varying levels, insulation, an emergency exit, and so on….
The Outa-Dor can be specified to multiple variants including sizes, panel design, hardware, colour and optional glazing elements. The doorset is perfect for warehouses, schools, offices, hotels, factories, supermarkets, sports facilities and many other sectors, where the benefits of using steel doors rather than timber is understood and appreciated. Steel is the best material for an external door in a commercial or industrial environment, it is just about getting the final specification and finish right for your building or design needs.
The flush fitting design allows for this doorset to be used in so many applications and with almost any colour possible along with a wide range of woodgrain effect laminate finishes you can have a door which cannot be distinguished from a timber panel.
Strong materials and finish
We manufacture the Outa-Dor using 1.2mm Magnelis© steel sheets as standard and this can be upgraded to either 1.5mm or 2.0mm sheets to increase the toughness of the door skin depending on the final purpose of the door.
Magnelis steel finish combined with enhanced powdercoat finishes can provide up to 10 year guarantee against corrosion, subject to location of the door.
Made to Measure
A strong, versatile and durable general purpose steel doorset, Outa-Dor is available in a wide range of made to order sizes from 690mm – 1340mm wide as single doors and 1000mm – 2600mm wide as double doors, and from 1500mm – 2800mm high.
Benefits of STEEL as the material in any external doorset:
- Stronger than other door materials for durability in daily use
- Double skinned door panel construction for performance, insulation and stability
- Modern paint and laminate finishes offer a beautiful final appearance
- Door panel can have embossed designs to suit your requirements
- Complete factory preassembled doorset gives compliance in commercial applications and continuity in build quality
- Can be specified for high performance requirements and relevant environment
- Fire rated specifications up to 2 hours
- Available as PAS 24 and approved by Secured by Design options
- Acoustic, Insulated, Security, Fire Protection and other performance specified and certified models in steel.
- Easiest installation on site with prebuilt components ready to use.
All Outa-Dor steel dorsets are manufactured as a complete unit, fully assembled with all hardware fitted as standard. The outer fixing sub frame has an adjustable c channel section to deal with out of square apertures and with adjustable fixing feet too the installation time on site can be vastly reduced.
There are 5 standard types of steel sub frame for this doorset to assist with variables in the opening and wall construction you are fitting into.
Key Features and Optional Configurations:
Fire resistance up to 2 hours – EN 1634-1
Fire-resistant sliding glazed doors up to 30 mins
Available tested to PAS 24
Burglary and bullet resistance
Door leaf and frame profiles available 30, 50 and 85 mm
Narrow 20mm and wide profiles available: 85, 130, 180 or 260 mm
Finger trap gasket tested to EN 1634-1
ApplicationFully factory built and assembled steel doorset available in variable final specifications to suit application or environment and performance requirements.
Outa-Dor is designed for use on the external fabric of any building with attention to weathersealing and security in the basic doorset.
With variable sizing, single or double leaf versions, multiple colour options and woodgrain finishes and design options this steel doorset could be used in almost any external application.
InstallationOuta-Dor is delivered completely factory assembled for the fastest and easiest on site installation. The doorset could be heavy depending on the specification ordered so will require more than one person to move on site and adjust into place for fitting.
The outer door sub frame has an adjustable frame to provide adjustments of up to 30mm and allow out of square openings to be accommodated easier.
Some door specifications will require specific methods, sub frames and fixings to be used to comply with their certification. General purpose steel doorsets can use the best fixings for the substrate you are fixing to.
WarrantyAll Outa-Dor steel doorsets manufactured using a base material of ‘Magnelis’ carry a 10 year anti-corrosion warranty in any locations classed as C1 – C3.
Any locations classed as C4 or C5 would carry a 5 year and 3 year warranty respectively. Anti-corrosion warranty applies to the door leaf only unless we are informed prior to quotation and manufacturing and an additional protection is offered for components not available in magnelis such as the vision panels, louvre panels, etc…
Any doorsets manufactured in Aluzinc carry a 24 month anti-corrosion warranty unless an enhanced PPC finish is requested and applied.
All doorsets carry a 24 month warranty against manufacturing defects.
All warranties are subject to site maintenance being carried out at regular intervals as outlined in the O&M manual.
MeasureA steel doorset is always ordered by the OVERALL dimensions including the door leaf and outer sub fixing frame with no tolerances allowed for. Most people would generally allow 5mm tolerance all the way around the door, but it all depends on how square or true your aperture is on site.
This means if your structural opening size is measured as 1000mm width and 2100mm height the door and frame ought to be 990mm wide and 2090mm high with the frame and any threshold included.
Always measure the top, middle and bottom of your aperture width and the left and right hand side for the height and if possible do a measure to make sure the opening is square as well.
Always use millimetres for measuring as this is how we relay back the ordering dimensions to you for checking and approving a drawing for your order.
The Robust Outa-Dor does have an adjustable fitting frame to take up to 30mm of tolerance into account which helps when the opening is not square.
