Samson srd55 compact with full hood up to 3000mm wide aluminium roller garage doors

Samson SRD55 Compact 55 mm Insulated Electric Roller Garage Door With Full Hood Premium Colours

This superb electric aluminium roller door is offered in a wide selection of premium colours and is one of our best priced roller doors when you just need a single size, simple and reliable door. This model comes with a complete full hood cover for the curtain roll. The full hood enables you to install the door neatly under the lintel or on the outside face of the garage, ensuring the roll is entirely protected from the elements while providing a clean fascia to finish the installation beautifully.

Flexible Fitting Without Full Headroom

We always stress that you do not necessarily need the full 205 mm of headroom. If you do not have this clearance, simply work out your ordering height by taking the total height you do have and deducting the hood and endplate size. Having the full hood version provides a built in fascia to neatly cover the roll where it hangs down in view. Not having enough headroom or side room does not prevent you from having a roller garage door at all.

Designed For Garages Used On Foot

The Samson SRD55 is a straightforward, no nonsense, high quality, compact sized, electrically operated aluminium roller garage door for anyone who does not need remote controls or high specification features. We have found that more than half of customers buying electric roller doors for single width garages will never use them for a vehicle, making remote control operation unnecessary. If your garage is entered purely on foot, a wall mounted rocker switch internally or an external key switch makes far more sense, keeping costs lower and complex electronics to an absolute minimum.

Premium Colour Selection

This roller garage door is perfect for single width garages, utilising high quality 55 mm double skinned insulated curtain sections in a compact roll design with a full hood cover included as standard. This premium model allows you to tailor your door precisely to your tastes, offering a choice of 12 beautiful finishes. All 12 colours listed below are fully included in the base price online, giving you complete freedom to achieve the perfect look for your home without any hidden surcharges:

• Chartwell Green BS14 C 35
• Brown RAL 8014
• Navy Blue RAL 5011
• Burgundy RAL 3004
• Light Beige BS 08B17
• Fir Green RAL 6009
• Ivory RAL 1015
• Agate Grey RAL 7038
• Dark Brown RAL 8019
• Moss Green RAL 6005
• Cream White RAL 9001
• Silver Metallic RAL 9006

The 55 mm slat used on this roller door is of a higher quality than many others on the market, which is why it can be ordered up to 3000 mm wide. High quality internal components also set it apart from many cheaper alternatives. Because this particular model is offered as a full hood specification, it makes it perfect for installation on the inside or outside face of the garage opening. If fitting on the outside, please be aware of the emergency manual release and ensure you order a lockable cover plate.

Control Systems and Operation

This electric roller door is powered by a reliable single phase 240 V internal tube motor and comes with a wall mounted internal rocker switch as standard. There is also an internal wall mounted control board option featuring easy to use Up and Down buttons. If you choose this internal control panel, you can then easily add an external key switch for outside operation.

To operate the standard door, simply press and hold the button or the key for the duration of the movement. This hold to run operation eliminates the need for safety beams or bottom edge sensor systems. This design ensures full compliance, simplicity and ease of installation and setup. It truly is the least complex setup for any electric roller door.

If you are looking for a remote control system, you can simply upgrade to the Genesis Remote Control Unit which comes with two hand held transmitters for remote control opening as well as an optical safety edge to combine convenience with current safety compliance. The Genesis wall mounted control system dimensions are 140 mm high by 120 mm wide by 50 mm deep.

Choose this uncomplicated electric aluminium roller garage door when you want a reliable and efficient solution without the added complexity of advanced features, but rest assured you can order it with a simple and fully compliant remote control system if required. Backed by a 2 year warranty as standard.

Configuring Your Door Online

Ordering your custom Samson SRD55 full hood door is a quick and straightforward process using our online shop configuration tool. Simply follow these steps to tailor the door to your exact requirements:

1. Select Your Dimensions: Choose your nearest Up to size from the drop down menus to generate your base price. If you are proceeding to order, you will then need to type your exact required width and height measurements into the text boxes provided.
2. Select Curtain Colour: Choose your preferred curtain finish from our premium range of 12 colours. All of these fantastic finishes are fully included in the online price.
3. Select Guide and Fascia Colour: Pick from a full selection of colours for the guide rails and the full hood fascia panel, allowing you to perfectly match or beautifully contrast these elements with your main curtain.
4. Select Motor Side: Choose whether the electric motor, the manual override mechanism and the power cable entry should be situated on the left or the right. Please note that this must be determined as you are looking at the door from inside the garage looking outwards.
5. Select Emergency Release: If this roller door is the only point of access into your garage, it is critical that you select the low level emergency manual release option. This ensures you can still open the door manually from the outside in the event of a power cut.
6. Select Your Control Method: Customise how you operate the door. Choose the standard hold to run internal rocker switch for basic manual control, or upgrade all the way up to our full remote control system, which includes an internal control panel, two handheld transmitters and the mandatory bottom safety edge sensor for obstacle detection.

Electric roller garage door, which is perfect for anyone using their garage for another room or storage and never putting a vehicle inside with the rocker switch specification.

Why bother with carrying remote handsets around and also losing them when you can have a simple wall mounted switch or external key switch to operate whislt walking to your garage on foot. Without the remote control system you do not need any safety edge or safety sensors as you will be operating the door with a key or your finger holding a rocker switch button.

The Genesis wall mounted control system dimensions are 140mm h x 120mm w x 50mm d.

Simple and easy with the least electronics possible.

Basic Installation Guidance for the Samson SRD55 With Full Hood

Installing the Samson SRD55 electric roller garage door is a straightforward process for anyone with competent DIY skills. While every door is supplied with a comprehensive installation manual, the basic steps below outline what to expect when fitting your new full hood door.

1. Preparation and Checking Dimensions

Before beginning, unpack the components and check them against your order. Measure the structural opening to ensure the guide rails and curtain roll will fit perfectly. The brickwork or timber frame should be structurally sound, plumb and level to ensure smooth and reliable operation.

2. Fixing the Guide Rails and Back Box

Position the guide rails against the opening, ensuring they are completely vertical and parallel. Mark the fixing positions, pre drill the holes into the masonry or frame and secure the guides using appropriate wall plugs and fixings. The end plates, complete with the back section of the full hood assembly, should be securely mounted at the top of the guides, ensuring they are perfectly level across the width of the garage opening.

3. Mounting the Curtain Roll

Carefully lift the insulated aluminium curtain roll into position between the top end plates. Ensure the motor cable is located on the correct side as specified during your online configuration. Secure the motor axle and the dummy end shaft safely into the mounting brackets on the end plates.

4. Attaching the Curtain

Feed the curtain carefully down into the vertical guide rails. Once the curtain is engaged securely within the tracks, attach the locking springs from the top slat of the curtain onto the motor barrel. Space these locking rings evenly across the width of the door barrel to ensure a perfectly balanced lift.

5. Wiring the Motor and Control Box

Mount your chosen internal control box or rocker switch to the garage wall. It is generally recommended to position this around 1500 mm from the floor for easy everyday access but out of the reach of small children. With the main power supply completely isolated, connect the motor cables to the control unit following the specific wiring diagram provided. If you have upgraded to a remote control system, ensure the aerial wire is positioned to hang vertically downwards out of the control box.

6. Setting the Motor Limits

Before fitting the final front cover, it is crucial to set the upper and lower travel limits of the internal tube motor. This step teaches the motor exactly where to stop when the door is fully open and fully closed. Follow the exact sequence in your instruction manual to set these limits carefully, ensuring the bottom weatherseal rests gently on the floor without crushing.

7. Fitting the Full Hood Cover

Once the limits are accurately set and the door is operating smoothly, the final step is to enclose the roller mechanism completely. Offer up the front and bottom sections of the full hood cover, sliding them neatly into position. Secure this outer fascia panel to the end plates and back box assembly using the fixings provided. This provides a premium, fully enclosed finish while protecting the internal mechanisms from weather and dust.

Important Safety Notice: All permanent electrical mains wiring should ideally be completed or checked by a qualified electrician to ensure full compliance with current UK building regulations. Always refer to the official Samson SRD55 fitting instructions provided with your delivery for the complete installation process.

Warranty Information

The Samson SRD55 electric roller garage door is manufactured by Alluguard, one of the UK's leading specialist roller door manufacturers. As such, the manufacturer's warranty for this door is provided directly by Alluguard, giving you the reassurance of a well established and reputable brand standing behind the product.

What Is Covered

The Alluguard manufacturer's warranty covers the following components of your Samson SRD55 roller garage door:

• Motor and Electrical Components: The internal tube motor and associated electrical control components are covered for a period of 2 years from the date of purchase against manufacturing defects and premature failure under normal domestic use.
• Mechanical Components: All mechanical parts including the guide rails, end plates, barrel assembly and spring mechanisms are covered for a period of 2 years from the date of purchase.
• Curtain and Finish: The 55 mm double skinned insulated aluminium curtain slats and their powder coated finish are covered for a period of 2 years from the date of purchase against peeling, flaking or excessive fading under normal weather exposure.

Warranty Conditions

To ensure your warranty remains valid, please observe the following conditions:

• The door must be installed in accordance with the official Samson SRD55 fitting instructions supplied with the product.
• The door must be used for its intended domestic purpose and operated within its designed specification.
• Any permanent electrical wiring must be carried out by a suitably qualified electrician in compliance with current UK regulations.
• The door must receive basic routine care, including occasional cleaning of the curtain surface with warm soapy water and cleaning of the guide rails with white spirit as recommended in the maintenance guide.
• No unauthorised modifications, alterations or repairs should be carried out on any part of the door or motor system.

What Is Not Covered

• Damage caused by incorrect installation or failure to follow the supplied fitting instructions.
• Wear and tear resulting from normal everyday use over time, including minor surface marks and weatherseal compression.
• Damage caused by accidental impact, misuse, neglect or failure to maintain the door as recommended.
• Damage resulting from extreme or unusual weather events beyond normal UK conditions.
• Cosmetic deterioration caused by environmental factors such as pollution, salt air or chemical exposure.
• Any costs associated with the removal, refitting or transportation of the door or its components for inspection or repair.

Making a Warranty Claim

In the unlikely event that you need to make a warranty claim, please contact Samson Doors in the first instance with your original order number and a clear description of the issue. Where applicable, photographs of the fault will help to speed up the assessment process. Samson Doors will liaise directly with Alluguard on your behalf to resolve any valid warranty claims as quickly and efficiently as possible.

Please note: Retaining your original order confirmation and proof of purchase is essential for processing any warranty claim. We recommend keeping these documents safely for the full duration of the warranty period.

Ordering Sizes for the SRD55 and SRD77 electric roller garage doors are the Over Guide Width (OGW) x Guide Height (GH).

We would always recommend a fitting tolerance is deducted when installing INBETWEEN any opening and this is usually 5-10mm all round, but is depending on how level your structural opening is.