Sws seceurodoor 9501 insulated security rated single phase 240v chain drive steel insulated and security rated

SeceuroDoor 9501 Insulated SR1 Security Rated Roller Shutter Door

LPS 1175 SR1 certified. Secured by Design approved. Insulated double skinned steel construction.

A tested and approved security rated door certified by the LPCB to LPS 1175 Security Rating 1 (SR1) and approved as a Secured by Design product. Third party tested and approved to a recognised standard that offers real, proven security rather than just a headline statement.

This is a high quality, double skinned steel industrial roller shutter door with 95 mm insulated laths and a single phase 240V GfA chain drive motor. The strength, security, wind resistance and thermal insulation offered by the double skinned curtain make this an excellent choice for medium to large commercial and industrial openings. The performance gains over any standard single skin steel roller door are significant in terms of security, insulation and longevity.

Why SR1 Security Certification Matters

The LPS 1175 SR1 rating is a nationally recognised standard that demonstrates a door's ability to resist forced entry using common hand tools. In real terms this means:

• Insurance Compliance: Many commercial insurers require or incentivise LPS 1175 rated products for high value stock or sensitive premises.
• Deterrent Value: The visible presence of a certified security door signals to potential intruders that your premises are protected by tested, robust barriers.
• Peace of Mind: Independent LPCB testing removes guesswork. You know exactly what level of protection you are getting.
• Secured by Design Status: Approved by UK police forces, this endorsement is trusted by local authorities, architects and security consultants.

The Commercial Case for Insulated Roller Shutters

While security is paramount, thermal performance is equally critical in today's commercial environment. This double skinned, foam filled roller shutter offers measurable benefits that directly impact operating costs.

Energy Efficiency: The 95 mm insulated lath with a centre U value of 1.1 W/m²K minimises heat loss through the door opening, which is often the largest source of thermal leakage in industrial buildings. This maintains stable internal temperatures, protects temperature sensitive stock and improves working conditions for staff whilst supporting building regulations compliance.

Acoustic Insulation: Minimal thermal bridges and the use of fine pored PU rigid foam infill ensure good thermal insulation, whilst the curtain and sealing technology used around the entire shutter reduce noise transmission in both directions. This is ideal for urban locations where external traffic noise disrupts operations, or noisy industrial environments where internal machinery needs to be contained to meet local authority noise restrictions.

Industrial Grade Construction with Single Phase Simplicity

The slats are 95 mm high in profile and 20 mm deep front to back with a foam injected core offering more strength and performance over any standard single skin slat. The slats are galvanised steel as standard for maximum protection.

GfA offer the very best industrial roller door motors with leading edge technology and excellent, reliable, intelligent control options. The single phase 240V motor provides industrial strength operation without requiring a three phase power supply, making it ideal for premises where three phase is unavailable or installation complexity needs to be minimised.

A vision option is available using 160 mm x 58 mm clear Perspex vision panels with a minimum of 170 mm spacing in between. A choice of four guide arrangement options is available with a standard guide angle of 100 mm x 50 mm.

LPCB Installation Requirements

To maintain LPS 1175 SR1 approval the following must be adhered to:

• The product must be internally face fitted around the opening.
• The head (axle, box and canopy) must be concealed behind the structure of the building.
• The bullet lock must be fitted to the internal side, accessed from the inside of the building only.

Technical Specifications

Quality Assurance

All SeceuroDoor products are CE or UKCA marked, ensuring full compliance with UK regulations for commercial use. LPCB approved products are also available across the range. Every door is manufactured within an ISO 9001 and ISO 14001 certified UK company, made to measure as standard for a perfect fit, and built using the highest quality components and electric motor drives.

Why Choose This Door

The cost difference between a basic single skin shutter and this double skinned, insulated, security rated door is minimal, but the benefits are substantial. Energy savings contribute to a rapid return on your investment, LPS 1175 certification can unlock insurance discounts, and the superior materials and construction deliver a longer working lifespan with quieter daily operation. The 240V single phase motor offers straightforward electrical installation in premises where three phase power is not available, whilst still delivering reliable industrial performance for warehouses, retail units, workshops, storage facilities and distribution centres.

Typical use for this 95mm insulated door would be on any commercial or industrial building, factory, workshop or warehouse wanting insulation and security too. The standard motor will offer around 30 - 40 operations per day. Workshop, larger factories, warehouses, any heated building. If your building is particularly exposed to high winds then this is the roller door to consider.

Technical Specifications

Security Rating

• LPS 1175 Security Rating: SR1 (Security Rating 1)
• Secured by Design: Approved
• Certification Body: Loss Prevention Certification Board (LPCB)
• Testing Standard: LPS 1175 burglary resistance - independently tested and approved

The SR1 security rating provides tested resistance against opportunist attack using common hand tools for a defined time period. This LPCB-certified performance level is recognised by commercial insurers, police forces and security consultants across the UK, making it ideal for retail premises, warehouses, distribution centres and any commercial property where physical security is a priority. As a Secured by Design product, this door meets the requirements of police crime prevention initiatives and may qualify for reduced insurance premiums on high-value or sensitive premises.

LPCB Installation Requirements

To maintain LPS 1175 SR1 certification, the following must be adhered to:

• The product must be internally face fitted around the opening
• The head (axle/box/canopy) must be concealed behind the structure of the building
• Bullet lock must be fitted to the internal side (accessed from the inside of the building only)

Failure to comply with these installation requirements will invalidate the SR1 certification. These specifications are critical where formal security ratings are mandated by insurers, consultants or building control.

Thermal Performance

• Lath Heat Transmission: Centre = 1.1 W/m²K | Quirk = 3.2 W/m²K
• Curtain Construction: Dual-walled steel profile with high-density injected foam core
• Insulation Type: CFC-free PU rigid foam infill
• Benefits: Reduces heat loss, lowers energy usage, minimal thermal bridges
• Acoustic Performance: Curtain and sealing technology reduces noise from both inside and outside

The 95mm insulated lath delivers a centre U-value of just 1.1 W/m²K, making this one of the most thermally efficient roller shutter doors available for commercial applications. The dual-walled steel construction with injected PU foam core minimises thermal bridging and provides significant energy savings compared to single-skin steel doors—particularly important for temperature-controlled environments, cold storage, food preparation areas and premises with high heating or cooling costs. The insulated curtain also provides effective acoustic dampening, reducing both external noise ingress and internal noise breakout to meet local authority requirements and improve working conditions.

Curtain Profile

• Lath Profile: 95mm high x 20mm deep
• Lath Weight: Nominal 13.15 kg/m²
• Material: Galvanised steel with insulated foam core
• Design: Curved and ribbed lath design for added strength and reduced deflection
• Performance: Smoother and quieter operation than single skin profiles, less curtain rattle in high winds

Maximum Dimensions

• Max Width: 7000 mm
• Max Height: 7000 mm
• Max Area: 44 m²
• Wind Class Rating: Class 5

Vision Options

• Vision Panel Size: 160mm x 58mm clear Perspex
• Panel Spacing: Minimum 170mm between panels
• Pattern Options: Brickbond or in-line configuration
• Benefits: Increased natural light and visibility of vehicles

Guide Systems

• Guide Options: Choice of 4 guide arrangement options
• Standard Guide Angle: 100mm x 50mm
• Bottom Slat: 65mm high x 23mm wide
• Bottom Rail Guide: 80mm deep x 73mm wide

Motor & Operation

• Motor Type: GfA single phase 240V chain drive industrial motor
• Mounting: External mounted
• Drive Type: Chain drive for reliable operation
• Suitable Usage: Medium-duty commercial and industrial applications (average daily operations)
• Features: Intelligent control options, leading-edge technology, reduced mechanical wear
• Electrical Advantage: Single phase 240V supply - no 3-phase power required, simplifying installation and reducing electrical infrastructure costs

The single phase 240V motor provides industrial-strength performance without the complexity or cost of a 3-phase electrical supply, making it ideal for smaller commercial premises, retail units, workshops and sites where 3-phase power is unavailable or impractical. GfA motors are recognised for their reliability, precise limit setting and advanced control options, delivering consistent performance in medium-usage applications.

Colours & Finishes

This roller door is available with the curtain in galvanised steel or pre-finished in either a powder coat finish (same colour both sides of the slat). All colours are supplied in a satin finish as standard. Matt and gloss finishes are available—please email or call for price details.

• Standard Finish: Galvanised steel (natural finish)
• Powder Coating: Available in any RAL or BS colour
• Gloss Level: Satin finish as standard (matt and gloss available on request)
• Plastisol Finish: Available on solid laths - 200 micron PVC protective coating in leathergrain embossed finish
• Custom Options: Mix and match guides, hood cover and curtain colours available

Note: Due to the powder coating process, the guide rails may not be an exact match to the slat colour. The guides are powder coated separately and colour variation can occur between batches and manufacturers.

Control Systems

The electric chain drive 240V motor can be controlled by various methods:

Option 1: Hold-to-Run Push Button Station

• Internal wall mounted push button station
• Hold-to-run logic - button must be held for the duration of the opening or closing cycle
• No safety edge or beam systems legally required with this method
• Most cost-effective option
• Requires alternative building entry door for access

Option 2: GfA Control Panel with Impulse Operation

• Wall-mounted control panel with advanced features
• Impulse operation - momentary push of up or down button for auto operation
• Built-in safety edge detection with bottom T-rail section
• Automatic stop function if obstacle is detected
• Suitable for most commercial applications

Safety Features

• Bullet Lock: Fitted to internal side only (SR1 requirement)
• Safety Edge Options: Optical or physical safety edge systems available
• Emergency Operation: Emergency low-level hand chain operation available on GfA motors
• Anti-Fallback: GfA Safedrive features built-in patented safety brake and anti-fallback device

Quality & Compliance

• CE/UKCA Marking: Fully compliant with UK regulations
• Manufacturing: ISO 9001 and ISO 14001 certified UK facility
• Made to Measure: All doors made to measure as standard for perfect fit
• Performance Testing: Independently tested for long-term durability
• Warranty: Standard 1-year parts warranty (extended 2-year warranty available on GfA motors when registered)

Professional Installation for Higher Specification Doors

While smaller, manually operated industrial roller doors can often be installed by competent builders, our higher specification and larger sized doors require specialist knowledge. High speed motors, advanced access controls, three phase operating systems, and certified security ratings demand precise setup and commissioning. For these advanced models, Samson Doors strongly recommends installation by trained, experienced professionals.

Incorrect fitting of a heavy, higher specification door can compromise its certified security rating, void the manufacturer warranty, and create serious safety risks in a working environment. A professional installation ensures that heavy duty side guides are securely fixed to the correct building structure, the curtain is perfectly tensioned, all complex safety devices are fully operational, and the motor is legally compliant with UK health and safety regulations.

Tell Us About Your Project

Every opening is different, and the best way to ensure you get the right door at the right price is to share as much detail as possible from the outset. If you have any photographs, sketches or drawings of your opening where the doors are required, please send them to enquiries@samsondoors.co.uk along with the following information:

• Rough opening width and height measurements.
• Expected number of operations per day.
• Number of users and the type of door controls required.
• Performance expectations such as security rating, insulation, wind loading or operating speed.
• Any specific colour or finish requirements.

From this information our team can suggest the best model and specification for your application and provide accurate pricing. The more detail you can share, the faster and more precisely we can help. Call us on 01933 448 850 or email enquiries@samsondoors.co.uk to get started.

SeceuroDoor Product Warranty

All SeceuroDoor products, including the industrial motor, are guaranteed against defects of material or workmanship by SWS UK, subject to correct installation, maintenance and operation, for a period of 1 year from the date of purchase. This comprehensive warranty provides peace of mind and protection for your investment in premium industrial door solutions.

Extended Warranty for GfA Motors

An exclusive extended 2-year warranty is available on GfA industrial motors when you register each drive using the GfA bluetooth dongle. Registration is straightforward and provides additional benefits including viewing and tracking all registered GfA assets in one place, monitoring ongoing usage patterns, keeping track of drive settings over time, accessing a comprehensive library of fault codes, and synching your service records.

Warranty Coverage

SWS UK will replace or repair any components of our products where the manufacturing process has resulted in a defect occurring during the relevant warranty period, subject to the exceptions and conditions detailed below. For all replacement electrical parts, the warranty period is 12 months or the remainder of the original warranty period, whichever is the longest.

Warranty Limitations and Exclusions

The SeceuroDoor warranty does not cover the following circumstances:

Visual Quality Standards

• Marks, distortion, stains, blemishes, indentations or scuffs which are not observable from at least 3 metres away in natural light (not direct sunlight)
• Minor variations in finish associated with the manufacturing process
• Impact damage or scratches, dents, scuffs or other minor abrasions occurring post-installation

Installation and Maintenance Issues

• Incorrect installation of the product, not following SWS UK's installation instructions
• Incorrect operation of the product or lack of proper care and maintenance in accordance with SWS UK's Operating & Maintenance Manual
• Any modifications made to the product by anyone other than SWS UK
• Use or attempted use of non-SWS UK spare parts
• Repairs or attempted repairs undertaken by any person other than someone specifically authorised by SWS UK
• Any attempt to reduce operating clearances by means of infills or draughtproofing

Normal Wear and Environmental Factors

• Normal wear and tear from regular usage
• Accidental or malicious damage from third parties
• External influences such as extreme or abnormal weather conditions, fire, water, salts, chemicals and bird droppings
• Any fault or surge in the customer's electricity supply
• Any failure of masonry or other structures onto which the product has been fixed

Coastal and High-Corrosion Environments

• Rust or corrosion caused by exposure to saltwater or salty air for products installed within 500 metres of the sea or a large body of saltwater
• For products installed within 2 miles of the sea, the exterior finish of the product is guaranteed for a limited period of 2 years only (regular weekly cleaning with warm water and mild detergent is essential)

Consumables and Consequential Costs

• Consumable items such as fuses, light bulbs or batteries
• Indirect, special or consequential loss or damage howsoever caused, including remedial work costs, call-out fees, tool or plant hire and transport costs

Important Warranty Conditions

The SeceuroDoor warranty covers parts only and does not cover labour costs or consequential costs. This includes but is not limited to call-out fees, transport costs and costs for remedial work for removing and/or re-installing faulty parts. All warranty claims must be reported promptly to allow for timely assessment and resolution.

Product Care Requirements

To maintain warranty validity and prolong the life of your SeceuroDoor product, correct operation and care in accordance with the official Operating & Maintenance Manual is essential. Regular maintenance includes wiping with a damp cloth and mild detergent to remove excessive dirt and grime, ensuring the floor is kept smooth, level and clear of dirt and debris which can damage the rubber seal, and conducting visual inspections to identify any issues before they develop into major problems.

Coastal Installation Requirements

Products installed in coastal environments or high-corrosion areas require enhanced maintenance protocols. Regular cleaning of products in locations within 2 miles of the sea is especially important. Doors should be cleaned thoroughly weekly using warm water and mild detergent with a soft cloth or sponge, allowed to dry naturally. Never use strong detergent, abrasive, caustic or solvent-based cleaners as these will void the warranty.

Visual Quality Assessment Standards

We recommend performing a visual quality check on installation. Carry out the quality check in natural daylight, not direct sunlight. Stand at a distance of 3 metres from the product to view the overall appearance. The product is acceptable if, taking into account the manufacturing process, none of the following is readily visible on the face of the product: marks or distortions associated with the manufacturing process, minor indentations, marks or scuffs on the surface, or paint or stain blemishes.

Making a Warranty Claim

For warranty claims or technical support, please contact Samson Doors on 01933 448 850 or email enquiries@samsondoors.co.uk. Please have your order details, installation date, and a clear description of the issue available. Our technical team will assess the claim and arrange appropriate resolution in accordance with the warranty terms.

Protecting Your Investment

Regular professional servicing and maintenance by qualified engineers will help ensure optimal performance and longevity of your SeceuroDoor product. Samson Doors offers comprehensive maintenance contracts and emergency repair services across the UK to keep your industrial doors operating reliably year after year.

How to Measure & Order

Ordering Dimensions

All SeceuroDoor SR1 electric roller shutter doors with industrial motor drives are measured and ordered using two key dimensions:

• OPENING WIDTH: The distance between the guides (excluding the guide thickness)
• GUIDE HEIGHT: The height of the guides (excluding the endplates)

This applies to both single phase and three phase electric motor systems.

Understanding Overall Width

The overall width at high level where the endplates are fitted will be wider than the opening width between the guides.

Motor Side Considerations:

• The motor side requires more sideroom than the non-motor side at endplate level
• Outboard motor setups require the most sideroom
• Chain drive or direct drive motor choice will vary the width required
• Endplate size varies depending on door model, height and curtain roll diameter when fully open

Emergency Manual Override

All doors include an emergency manual override as standard, located on the same side as the motor (internally), accessed directly underneath the endplate. Alternative positions are available on request.

SR1 Installation Requirements

Internal Face Fit Only

To maintain LPS 1175 SR1 certification, this door must be installed to the inside face of the aperture (face fit behind the opening). This is a mandatory LPCB requirement.

• Your clear opening dimensions are the space between guides and underneath the endplate
• The head (axle/box/canopy) must be concealed behind the structure of the building
• Bullet lock must be fitted to the internal side only

Clear Opening Height - Important

Hangdown Allowance: All roller shutters have a 'hangdown' when fully open, which reduces the clear drive-through height.

• Hangdown varies by door model and curtain specification
• The final drive-through height will be slightly less than the guide height
• Critical Height Applications: If your clear opening height is critical, contact us before ordering to determine the best guide height to achieve your required clearance

Traditional Build Guide Systems

This SR1 door uses steel guides and angle profiles for installation, which can be specified to suit different structural requirements including:

• Standard face fit configurations
• Mixed inset/outset angle arrangements
• Custom structural fixings
• Various substrate types (concrete, steel, brickwork, timber)

Need Help with Measuring?

If you're unsure about any measuring or ordering dimensions, our technical team is here to help.

Contact us:

• Phone: 01933 448 850
• Email: enquiries@samsondoors.co.uk

We can provide technical drawings and confirm the correct dimensions for your specific installation requirements to ensure LPS 1175 SR1 compliance.

Key Points to Remember

• Order by opening width (between guides) and guide height (excluding endplates)
• Overall width at high level will be wider due to endplates and motor
• Allow for hangdown when door is fully open
• Motor side requires more sideroom than non-motor side
• SR1 doors must be face fitted internally only - no reveal fit options available
• If in doubt, contact us before ordering