Description
This high quality, electric operated, insulated, aluminium double skinned roller garage door keeps things simple. it is made to measure as standard for a perfect fit to your garage, optimising the drive through width when fitted behind the opening. The door can be fitted internally as a face fit or inbetween your opening if required, or a bit of both even. Always remember to include the guides and the endplates which hold the roller curtain barrel.
A simple internal wall mounted rocker switch controls the door movement up or down and of course you can stop the door at any point too.
This roller door was developed by GDO to offer a compact roller garage door with a very simple, wall mounted push button operation, for everyone who uses their garage for any purpose where you walk to the garage, either from outside or inside, but always as a pedestrian and therefore why would you need a remote control system? It is perfect for integral garages, but also for any detached garage where you always walk to the garage anyway. In fact this door is perfect for anyone who simply doesn't use their garage for vehicle storage.
If you are regularly entering and exiting your garage with your vehice, then we do suggest remote control operation.
A hold to run wall mounted control box gives you door operation control internally and you can also have an optional external keyswitch for operating the door from outside if required (hard wired). This hold to run control for the door means there is no necessity for any infra red beams or a bottom edge safety sensor as the door operator has full control of the door during operation and can stop at any point during operation it is essential the operator is in full view of the door for this type of hold to run control.
Made to measure doors sizes up to a maximum width of 5200mm, including the guides either side.
Maximum height is 2900mm, plus the height of the roll and endplates which is 300mm regardless of whether you have a hood cover or not
The aluminium side channel guides are either 75mm or 90mm, depending on the door width ordered.
Doors over 3000mm wide will always have 90mm guides as standard so the clear opening width will be 180mm less than the ordering width.
The roller curtain is offered with a total of 21 colour options. 3 very popular standard colours have no extra charge and then 18 premium colours are offered with a small extra surcharge. This includes 3 woodgrain effect finishes.
Emergency Override
Every electric roller door has an internal emergency manual override system in the form of a winding handle operation on the same side as the motor drive. Simply hook the windig handle up and rasie or lower your door if there is a power cut. if you do not have a pedestrian door entrance into your garage then order the low level external manual release to provide access to the emergency system from the outside.
This full hood cover model provides the ultimate protection at all times with the curtain roll and mechanism enclosed in an aluminium 4 sides hood which is available in 3 standard colours or the same colour as the curtain choice for additional cost.
The hood cover is fitted to the endplates on either side of the roller barrel which the curtain rolls around.
Specification
The GDO ROLL 77 is constructed from high quality 77mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, electric operated roller garage door as standard, made to the exact millimetre in width and height.
The door is electrically operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage.
The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 300mm x 300mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.
Door guides either side are either 75mm or 90mm wide and 34mm deep and the door is ordered using the ‘OVERGUIDE’ width from the total width of the curtain and guides combined.
The door can be fitted BEHIND or INBETWEEN the structural opening as required, but always check you have ordered the correct dimensions to take into account the guides and endplates (full hood cover if ordered is the same dimensions)
Ordering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide will have 75mm wide guides either side
Clear opening width = Ordering size less 150mm
Clear opening height = Guide height (Ordering size) less 50mm
Doors over 3000mm wide will have 90mm wide guides either side
Clear opening width = Ordering size less 180mm
Clear opening height = Guide height (Ordering size) less 50mm
(to allow for the bottom slat hang-down into the guide when door is open)
Maximum Width including guides is 5200mm
Maximum Height for guides is 2900mm (Total of 3200mm with the endplates and hood) with a maximum width of 4600mm
Standard Colours:
White (RAL 9016)
Anthracite Grey (RAL 7016)
Black (RAL 9005)
Optional Premium Colours:
Brown RAL 8014
Chartwell green
Navy Blue RAL 5011
Burgundy RAL 3004
Light beige BS 08B17
Fir green RAL 6009
Ivory RAL 1015
Agate Grey RAL 7038
Silver Metallic RAL 9006
Dark brown RAL 8019
Moss Green RAL 6005
Cream White RAL 9001
Graphite
Slate Grey RAL 7015
Duck Egg Blue
Irish Oak - painted finish
Golden Oak - painted finish
Rosewood - painted finish
WarrantyWarranty Terms & Conditions
Certificate of Guarantee
1.1. The following guarantees apply to GDO Roll 55 and Roll 77 Electric Button Control roller garage doors, subject to correct installation, maintenance and operation:
1.1.1. GDO Roll 55 and Roll 77 Electric Button Control roller garage doors are guaranteed against defect of material or workmanship by the manufacturer with a parts only warranty for a period of 2 years from the date of original purchase.
1.1.2. GDO Roll 55 and Roll 77 Electric Button Control roller garage doors’ exterior finish is guaranteed to provide an effective weatherproof membrane that will resist perforation of the substrate from the weather side due to corrosion for a period of 2 years from the date of purchase.
1.1.3. Externally fitted reverse roll GDO Roll 55 and Roll 77 Electric Button Control roller garage doors will resist perforation of the substrate from the weather side due to corrosion for a period of 2 years from the date of purchase. Colour change or fade to the exterior surface will be limited and uniform during the guarantee.
1.1.4. GDO Roll 55 and Roll 77 Electric Button Control motors and the Genesis, Teleco Simple and C10 control units are guaranteed for a period of 2 years from the date of purchase.
1.1.5. Somfy motors and the Rollixo control unit are guaranteed for a period of 5 years from the date of purchase.
1.2. This guarantee is in addition to your legal rights in addition to the manufacturers products that may be faulty or not as described. Advice about your legal rights is available from your local Citizens’ Advice Bureau or Trading Standards Office.
1.3. The following terms apply to all GDO Roll 55 and Roll 77 Electric Button Control roller garage doors purchased for installation in the UK. The terms shall prevail or be in addition to any agreement between you, the customer, the installer and/or the manufacturer.
1.4. The manufacturer will replace any components of our products sold as GDO Roll 55 and Roll 77 Electric Button Control roller garage doors (‘the Product’) where the manufacturing process has resulted in a defect occurring during the relevant period specified in the Conditions of Guarantee.
MeasureOrdering size is the Over Guide Width (OGW) x Guide Height (GH).
Doors up to 3000mm wide have 75mm wide guides
Clear opening width = Ordering size - 150mm*
Doors over 3000mm wide have 90mm wide guides
Clear opening width = Odering size - 180mm*
* These measurements are correct for behind fit installations, please contact us for guidance inbetween fit installations.
Clear opening height = guide height - 50mm (to allow for the bottom slat hand-down into the guide).
Overall Height is the guide height plus the endplate size at 300mm
