Hormann thermo65 thp 900 purpose made steel entrance doors

The Hormann Thermo65 doors feature a 65mm thick steel door leaf mounted on an aluminium frame. This frame adds to the insulation value as it offers a better thermal break. The thicker door is filled with rigid CFC free PU foam for both strength and insulation.

Not only does the door leaf contribute to enhanced insulation but the 80mm aluminium door frame also has PU foam infill and a thermal break. Triple seals on the threshold strip and another thermal break all help to maximise insulation to give a fitted door with a thermal u value as low as 1.0W/m2K.

Thermo65 Doors are supplied in Traffic White as standard, with a choice of 10 powdercoat colours and 4 woodgrain laminate finishes on certain models at a small extra cost. The doors are colour finished on both sides including the frame.

Thermo65 Doors are supplied in Traffic White as standard, with a choice of 10 colours at an extra cost: -
White RAL 9016 Powdercoat finish (as standard)
Ruby Red RAL 3003
Light Grey RAL 7035
Window Grey RAL 7040
Clay Brown RAL 8003
Moss Green RAL 6005
Terra Brown RAL 8028
White Aluminium RAL 9006
Anthracite Grey RAL 7016
Pigeon Blue RAL 5014
Light Ivory RAL 1015

Woodgrain Decograin Finish Options
Golden Oak
Dark Oak
Titan Metallic
Night Oak

Profile Types

A3 round style

A4 rectangular version

click here for further information >

For technical information, please click here PDF >

The Hormann Thermo65 Style 900 is suitable for any residential application.

Overall Frame Dimensions

This range of contemporary and classic styles of entrance doors is also highly secure thanks to multi-point locking. Conical swing bolts, security bolts and a lock bolt pull the door tightly shut. Three further security bolts on the hinge side, in conjunction with the three standard hinges, make it practically impossible to force the door open.

Glazing Options: 3 panes of insulated glass, clear single-pane safety glass, sandblasted with clear horizontal stripes and clear laminated safety glass.

Handle: HB 38-2 (as standard).

To view the Hormann ThermoPro Entrance Doors Brochure, please click here PDF >

For further information on the Hormann Thermopro Entrance Doors, please click here >
 

Samson Doors offer an installation service for front entrance doors however this depends on location.

If you require an installation with your purchase, please state so in the Comments & Requests section of our checkout process.

Hörmann products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim.
In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Product Services Department at Hörmann (UK) Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details:
1 Your name, address and telephone number
2 Original invoice with date of purchase
3 Product description/door type and product number
4 Description of defect
An assessment of the claim will then be made. This may require Hörmann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and on the page opposite, and that you follow these instructions throughout.

Hörmann (UK) Ltd Garage Door Warranty
Warranty Period The purchaser is granted a warranty covering the safe and reliable function of the Hörmann garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foilcoated timber-effect, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period.
Requirements
Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty.
Performance
During the warranty period we undertake to rectify any and all defects to the Hörmann product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.
Replaced parts become our property.
The warranty does not cover damage caused through:
• normal wear and tear
• improper installation
• negligent care and maintenance
• improper initial and subsequent operation
• negligent or wanton destruction
• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
• mechanical damage through improper transport and fitting
• priming and other surface protection treatments
• incorrect or too late applied surface protection treatments
• repair by non-qualified persons
• using non-Hörmann parts without the approval of the manufacturer
• removal of the product number or making it unidentifiable
Electric Operator Warranty
A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e.g. fuses, batteries, bulbs etc.).

User Information/Care
Finish - Steel Doors
The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Hörmann steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.
Finish - Timber Doors
Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer's instructions. Failure to follow these instructions will result in early deterioration of the timber panel.
Finish - GRP Doors
GRP door panels should periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP. and should be removed using water as soon as possible. GRP doors should not be painted over.
Paint Finish - Steel Doors
Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties.