- Description
- Application
- Specification
- Installation
- Warranty
- Measure
High Security Electric Steel Roller Shutter – SR2 Rated
Product Overview
High quality, electric operated, high security, industrial steel roller shutter using a standard gauge curtain slat in an 18swg (1.2mm) thick galvanised steel curtain. The traditional build is primarily for internal face fit applications, which is suitable for most commercial buildings, especially those of steel frame construction.
This security rated and tested roller door is built for buildings where security is important, giving peace of mind due to its tested security level 2 (SR2) rating.
This is a single phase, 240V electric motor operated security roller shutter for the UK market using a single skin steel curtain. If insulation is required, consider our 9501 model, which features a double skinned insulated steel slat.
Industrial Build and Applications
Built for low to medium use, this is a high quality, industrial ‘Traditional’ build roller shutter door, using an externally mounted chain drive industrial GfA motor for electric operation. Only built for internal face fitting, this door suits a wide range of applications and provides excellent, reliable daily operation.
Motor Technology and Usage
GfA manufacture the very best industrial door motors, providing leading edge technology and excellent, reliable access control options. Electric drive 240V motor roller doors are usually intended for medium usage openings with average daily use, as they do not have the higher cycle ratings of three phase motor drives.
The single skin steel galvanised curtain uses a 75mm scrolled lath in 18 gauge steel, with guides and endplates also fabricated from galvanised steel for durability and strength.
Tested Security Compliance
The rigorous LPS 1175 burglary resistance standard is operated by the Loss Prevention Certification Board (LPCB), the UK’s leading independent certification body. The LPS 1175 standard is recognised and endorsed by 16 organisations, including the Association of British Insurers and the Association of Police Officers.
Key Features & Benefits
- Security Level 2 rating – High Security Industrial Applications
- Strong single skin galvanised steel profile curtain in 18 swg (1.2mm)
- Spans widths up to 7000 mm
- Available powder coated to any RAL/BS colour, with many standard colours offered
- Only available in 18 swg slat
- Internal face fit only for compliance
- Bullet locks fitted to the internal side as standard, accessed only from inside the building
Applications & Typical Use
Ideal Applications for the Single Phase 240V Seceurodoor
Typical use for this Seceurodoor with a single phase motor would be on any industrial or commercial building where there are approximately 30 to 40 operations a day or less. This makes it the perfect solution for:
- Small to medium retail warehouses and storage facilities
- Manufacturing facilities with standard operational hours
- Commercial office buildings with secure loading areas
- Leisure and hospitality facilities requiring periodic secure closure
- Industrial units with moderate daily access requirements
- Retrofit installations where three phase supply is unavailable
Certified Security Protection
If security is important to you, this level 2 certified LPS 1175 rated door is ideal. The independent security certification ensures your investment meets insurance requirements and provides verified protection against determined attack. This certification level is widely recognised by UK insurers and demonstrates compliance with the highest burglary resistance standards.
Single Phase Motor Advantages for Medium-Use Applications
The single phase 240V motor drive is specifically engineered for buildings with moderate operational frequency. This configuration delivers several practical benefits for your application:
- Perfect Load Matching: Designed for 30-40 daily operations – avoids over-specification and excessive operational stress
- Efficient Power Usage: Single phase motor provides optimal power delivery for typical medium-use daily cycles
- Cooler Running Operation: Lower continuous duty cycles extend motor lifespan and reduce maintenance requirements
- Consistent Performance: Reliable, predictable operation without the complexity of higher-powered alternatives
- Standard UK Installation: Compatible with existing single phase electrical supply – no costly upgrades needed
- Cost-Effective Operation: Lower energy consumption and simpler maintenance reduce total cost of ownership
Emergency Manual Override System
This roller shutter door includes an emergency manual override system as standard, ensuring operational continuity even during power failures or electrical faults. The chain pulley override is conveniently integrated with the motor on the same side, providing straightforward manual operation without requiring additional installation space or complex mechanisms.
This safety feature ensures that your premises remain accessible in emergency situations and provides compliance with building safety regulations requiring alternative means of operation.
Is This the Right Solution for Your Building?
If your building requires SR2 certified security with moderate daily access frequency and you need to avoid expensive three phase electrical installation, the single phase 240V Seceurodoor represents an excellent value investment.
Contact us today for expert advice on whether this model suits your specific application, or for information on higher-capacity alternatives if your operational requirements increase.
Curtain Construction & Material
The SeceuroDoor 7502 (Industrial) features a heavy-duty 18-gauge galvanised steel single-skin curtain with a robust 75mm scrolled lath profile. This traditional build industrial roller shutter provides superior corrosion resistance and structural durability. It is available in a standard galvanised finish or a wide range of powder-coat colours to match your business branding.
⚠️ Critical Installation Requirement for SR2 Certification
THIS ROLLER SHUTTER DOOR MUST BE FACE-FITTED INTERNALLY TO COMPLY AND ACHIEVE THE CERTIFICATION FOR THE SR2 RATING.
The guides and complete roll of the curtain must be completely behind the structural opening and not visible from outside. If you choose to fit in-between or externally, then the certification compliance is not possible.
Single Phase 240V Electric Motor System
The GfA Single Phase 240V Chain Drive Motor is specifically engineered for medium-use applications (approx. 30-40 operations per day). This configuration combines proven industrial reliability with cost-effective operation, utilizing a standard UK single-phase electrical supply.
Key Motor Advantages:
- Standard Power Compatibility: Connects to a standard 240V supply, eliminating the need for expensive three-phase power upgrades.
- GfA Quality: Manufactured by GfA, the industry leader in door automation, ensuring the same build quality as higher-capacity 3-phase models.
- Chain Drive System: External chain drive configuration allows for reliable lifting power and straightforward manual override.
- Thermal Performance: Optimised for moderate duty cycles with excellent heat dissipation.
Control Options
The electric single-phase motor can be controlled by two main methods, tailored to your operational needs:
Option 1: Internal Push Button Station (Hold-to-Run)
The most basic and cost-effective method is an internal wall-mounted push button with "hold-to-run" logic. The operator must hold the button firmly for the duration of the cycle. This removes the legal requirement for safety edges. (Note: A separate pedestrian entry door is required for this method).
Option 2: Wall-Mounted Control Panel (Impulse Operation)
For greater convenience, a wall-mounted control panel can be programmed for "impulse" operation (one-touch). This system features a safety edge detection system built into the bottom rail to instantly stop and reverse the door if an obstacle is encountered, providing enhanced safety for frequent daily use.
SR2 Certification & Security Protocol
To maintain LPS 1175 Level 2 compliance, the bullet locks must be inserted and secured in place when the door is closed. This should be carried out at the last operation of the day and form a mandatory part of your building's security protocol.
Colour and Finish Options
We offer versatile finishing options to suit your aesthetic requirements:
- Powder Coat Finish: A high-quality polyester powder coating applied to both sides of the slat for a consistent appearance.
- Plastisol Coated: A durable HP200 leathergrain external coating with a standard off-white internal finish, ideal for exposed locations.
- Natural Galvanised Steel: The standard industrial finish, providing excellent corrosion resistance and a clean, functional look.
Custom Colours: We can supply bespoke colours beyond our standard online range. Please contact us for a custom quotation.
Quality Assurance & Compliance
All SeceuroDoor Industrial Shutters are:
- CE or UKCA Marked: Fully compliant with UK regulations for commercial use.
- ISO Certified: Manufactured in the UK by an ISO 9001 (Quality) and ISO 14001 (Environmental) certified company.
- Made to Measure: Every door is manufactured to your exact millimetre specifications.
- Premium Components: Utilizing industry-leading GfA drives for reliable, long-term performance.
Technical Summary
| Curtain Material: | 18-gauge (1.2mm) galvanised steel, single-skin |
| Lath Profile: | 75mm scrolled lath design |
| Security Rating: | LPS 1175 SR2 (Internal Face-Fit Only) |
| Motor Type: | GfA Single Phase 240V Chain Drive |
| Usage Rating: | Medium Use (30-40 ops/day) |
| Manual Override: | Chain pulley system (standard) |
| Maximum Width: | Up to 6200 mm |
Full installation details are provided with every door and if you do require professional installation then just call or email us to discuss the details and get a price from us.
Warranty & Support
SeceuroDoor industrial roller shutters are backed by comprehensive warranty coverage, reflecting the high quality and reliability of our products.
GfA Motor Warranty
All SeceuroDoor models come with GfA industrial motors as an option. These motors benefit from:
- Standard Warranty: 12-month comprehensive coverage from commercial use
- Extended 2-Year Warranty: Available exclusively through SWS UK and Samson when you register your motor using the GfA Bluetooth dongle
Extended Warranty Benefits
Motor registration provides additional benefits beyond warranty coverage:
- Centralised asset management and tracking of all registered GfA motors
- Usage monitoring and performance insights
- Priority technical support access
- Seamless warranty administration
Product Coverage
Warranty coverage includes all motor components, mechanical parts, control systems, and electrical functionality. Full warranty terms and conditions apply based on correct installation and maintenance procedures.
For complete warranty details or to register your motor, please contact our technical team.
Measuring Guide: Industrial Electric Roller Shutters (SR Rated)
IMPORTANT: MANDATORY FACE-FIT INSTALLATION
To comply with the certified Security Rating, this door MUST be installed internally to the face of the opening. Installation "between" the opening (reveal fit) or externally is NOT permitted and will void the certification.
For all industrial electric roller shutter doors equipped with an industrial motor (single or three-phase), the measuring, pricing, and ordering dimensions are defined by the OPENING WIDTH and GUIDE HEIGHT. These dimensions exclude the guides for the width and the endplates for the height. Please refer to the measuring diagram below.
ORDERING WIDTH = Opening Width (Clear width between the guides)
ORDERING HEIGHT = Guide Height (Floor to top of guides, excluding endplates)
Critical Dimensions & Motor Sideroom
Unlike tube motor doors, the overall width at the high level (where the barrel and endplates are fitted) will be wider than the overall width across the guides. This width can vary significantly depending on whether you choose an Inboard or Outboard motor setup.
- Outboard Motor: The motor is mounted externally on the endplate. This setup requires more sideroom on the motor side compared to the non-motor side.
- Motor Type Impact: The choice between a Chain Drive or Direct Drive motor will also affect the total width required at the head of the door.
Endplates & Headroom
The size of the endplates (and hood, if fitted) will vary depending on the specific door model and the total height of the door, as taller doors create a larger curtain roll. Please ensure you have sufficient headroom above the ordering height to accommodate this.
- Manual Override: The emergency manual override (included as standard) is located on the same side as the motor internally. Access is directly underneath the endplate. Alternative positions are available on request.
Face Fit - Behind the Opening (Required)
This industrial roller shutter is designed to be installed to the inside face of the structural opening. This "Face Fit" ensures the entire guide and coil mechanism sits behind the fabric of the building, providing maximum security.
In a perfect scenario, your ordering dimensions (Daylight Opening) will be equal to the clear space between the guides and underneath the endplates.
Important Note on Hangdown: Be aware that ANY roller shutter will have a degree of ‘hangdown’ (the bottom slat visible in the opening) when fully raised. This means the final drive-through height will be slightly less than the Guide Height. This varies by model and curtain specification. If your drive-through height is critical, please speak to us first to determine the best height to order.
Traditional Build Industrial Motor Driven Arrangement and Ordering Dimensions
(showing outboard direct drive motor arrangement)
