Sws seceuroguard 1000 security grille external fit for doors steel security grilles retractable

SeceuroGuard 1000 External Doorway Grille

The SeceuroGuard 1000 External Doorway Security Grille provides a high quality collapsible steel defence designed specifically for face mounted installation on the outside of domestic and commercial properties. Custom built to exact measurements up to 1600mm wide and 2500mm high, this robust system ensures comprehensive doorway security while enduring unpredictable external weather conditions.

Important Ordering Note: This external face fix configuration requires additional measurements to be added to your clear doorway opening size. To calculate the correct overall frame size, you must add the sash bunch size (the space where the retracted grille stacks) and the top reinforced section depth. Please consult our ordering guide or contact our technical team for assistance with your dimension calculations.

It is the ideal security solution for front doors, back doors, side entrances, and commercial access points where surface mounting directly to the external building facade is the most viable installation method. Please be aware of any fire exit protocols particularly when used in a commercial site and ensure it is complying with the fire strategy during operational hours for the building.

Benefits for British Properties

Installing an external face mounted security grille provides several distinct advantages for safeguarding the main entry points of your property:

• Acts as a highly visible primary physical deterrent to stop opportunistic intruders before they even reach your main solid door
• Allows you to leave your solid external doors wide open during warm weather to maximise air flow while maintaining total entrance security
• Galvanised and powder coated finish ensures exceptional weather resistance against harsh British wind and rain
• Creates an extremely secure barrier over recessed doorways or alcoves preventing unwanted access to the porch area
• Zero maintenance operation ensures quick and effortless locking when leaving the property

Flexible Design Options

You can personalise your security grille by selecting either the traditional 'X' lattice or the softer 'S' lattice design at the exact same price. Depending on your specific doorway setup, the system is available as a single sash that stacks neatly to one side, or a double sash that divides centrally to stack evenly on both sides of the doorway.

This fully weather protected system comes in 122 standard colours to coordinate effortlessly with your exterior brickwork or cladding. Special custom colours are also available upon application. To find your perfect match, view the RAL Colour Chart PDF here.

Practical Track Solutions

For locations requiring a completely clear threshold, this external doorway system offers a removable bottom track option. This provides excellent flexibility for entrances where uninterrupted wheelchair or foot access is needed, or where the bottom track requires periodic removal for sweeping and cleaning.

Key Security Features

• Strong security barrier and visual deterrent custom built for external doorways
• Galvanised steel construction with a corrosion resistant powder coating for supreme weather protection
• Multi point locking mechanism (2 or 4 point) operated from a single key
• Fully retractable setup featuring a smooth running carrier system for easy access
• Maintains excellent ventilation and through vision when safely locked
• Configured for external doorway installations measuring up to 1600mm by 2500mm
• Choice of single or double sash stacking arrangements
• Face fix mounting directly to the building facade outside the doorway
• Removable bottom track option available for clear access requirements
• Custom built with sash bunch and top reinforced section measurements included
• Delivers standard SeceuroGuard 1000 strength in a dedicated external doorway solution

The SeceuroGuard 1000 is suitable for physical security of external doorway openings up to 1600mm wide and 2500mm high, with this configuration specifically designed for face-fix mounting to external building façades outside doorways. Available in single or double sash arrangements to suit customer requirements, this application-specific solution is ideal for both domestic and commercial premises where external doorways require robust security protection with surface-mounted installation.

FOR DOMESTIC PREMISES

Elegant good looks with a heart of steel - the SeceuroGuard 1000 Retractable Security Gate System combines a classic appearance with strength, making it an ideal security choice for external doorways where face-mounting is required. The high quality components used in manufacturing, combined with galvanised steel and weather-resistant powder coating, make this one of the best security grilles for external doorway applications in the UK market. It is strong and yet subtle in appearance with elegant profile sections.

• Front doors and main entrance doorways
• Back doors and rear entrance doorways
• Side doors and service entrance doorways
• Kitchen doors to gardens and outdoor areas
• Utility room external doorways
• Garage to exterior doorways
• Basement and cellar external doorways
• Properties with insufficient reveal depth for internal fitting
• Listed buildings where internal installation is not permitted
• Any external doorway requiring face-mounted security

FOR COMMERCIAL PREMISES

Allowing maximum natural light into commercial premises whilst providing robust external doorway security, retractable gates fold to the sides of the doorway opening when not required and can provide highly visible security deterrence when deployed. be aware of the fire strategy and ensure this product is nt contravening any protocol for fire exits during business opening hours.

• Retail shop entrance doorways
• Commercial premises external doors
• Office building entrance and exit doorways
• Warehouse and industrial unit external doorways
• Restaurant and hospitality venue external doorways
• Storage facility and depot doorways
• Educational building external doorways
• Healthcare facility external entrance doors
• Sports and leisure facility doorways
• Any commercial external doorway requiring face-mounted security

Installation Parameters:

• Maximum width: 1600mm (overall frame size including sash bunch allowance)
• Maximum height: 2500mm (overall frame size including top reinforced section)
• Sash options: Single sash (stacking to one side) or double sash (stacking to both sides)
• Installation type: External face-fix mounting only (outside doorway)
• Bottom track options: Standard or removable
• Ordering requirement: Add sash bunch dimension + top reinforced section depth to doorway opening size
• Suitable for: External doorway installations in domestic and commercial properties requiring face-mounted security

Technical Specification: SeceuroGuard 1000 Retractable Security Grille

The SeceuroGuard 1000 is a premium, made- o measure retractable security grille designed for medium to high security applications in domestic, commercial, and retail environments. It is manufactured in the UK to ensure an exact fit and operates with a smooth, reliable glide.

Size Capabilities

• Maximum Width: Up to 1800mm wide for this model
• Maximum Height: 2500mm
• Minimum Width: 500mm
• Minimum Height: 500mm

Construction & Materials

• Core Material: Fully pre-galvanised, high-grade steel construction throughout for maximum durability and rust resistance.
• Lattice Design: Supplied with a strong classic steel 'X' lattice as standard, with a softer, modern 'S' lattice available as an option at the same price.
• Assembly: Features a robust, steel-riveted lattice assembly system with overlapped locking profiles.
• Weight: Nominal weight of approximately 19kg per square metre.
• Operation: Top-hung system running on durable, nylon-coated steel bearings for smooth, quiet manual sliding.
• Finishes: Powder-coated in a choice of 27 standard colours, including Brilliant White (RAL 9016), Black (RAL 9005), Anthracite Grey (RAL 7016), and Brown (RAL 8014). Custom RAL colour matching is available upon request.

Locking & Security Options

• Locking System: Secure, multi-point (2-point or 4-point) locking mechanism operated via a single key.
• Keying Options: Multiple grilles can be keyed alike for convenience.
• Additional Security: Locking posts can be specified at both ends for maximum operational flexibility.

Installation & Configuration

• Sash Configuration: Single sash bunching to one side for this model only
• Track Options: Supplied with a standard fixed bottom track, or an optional fold-up/removable bottom track, ideal for doorways and patios where a permanent trip hazard is unacceptable.
• Hinge Aside: An optional hinge-aside configuration is available to fold the bunched sash out of the way for maximum accessibility and clear walkthrough.

Looking for Insurance Approved Security?

If your property requires a higher, certified level of security (often stipulated by commercial or high value residential insurance policies), you should specify the SeceuroGuard 1001.

This upgraded model shares the exact same elegant aesthetics as the 1000 but features heavier-duty internal components and enhanced locking. It has been independently tested by the Loss Prevention Certification Board (LPCB) and awarded an LPS 1175 SR1 security rating. It is also a Police Preferred Specification under the 'Secured by Design' initiative.

Installation Guidance: External Doorway SeceuroGuard 1000 Grille

Installing a SeceuroGuard 1000 retractable security grille externally over a doorway (up to 1800mm wide) is a straightforward process for competent DIYers and tradespeople. At this size, the grille is generally simple enough for a single person to handle. The smooth operation and ultimate security of the grille depend entirely on the framework being installed perfectly square, plumb, and level.

1. Pre Installation Size Check

Before beginning, unpack the grille and verify the dimensions against your exterior opening. The SeceuroGuard grille is always ordered with the Overall Width and Overall Height, which includes the entire surrounding framework and the bunched sash.

Because you are carrying out an external Face Fit Installation (fitting to the exterior wall surface rather than inside the recess), ensure your ordered sizes correctly account for the side posts, top and bottom tracks, and any necessary reinforcement sections sitting flat against the brickwork.

2. Preparing the Exterior Opening

• Clear Obstructions: Clear the exterior installation area of any obstructions, such as outdoor lighting, drainpipes, or uneven rendering. Ensure adequate clearance on the wall for the sash bunch width to sit out of the way of the doorway.
• Check Substrate: You must use the correct exterior-grade fixings for your specific wall type (e.g., heavy-duty masonry anchors for exterior brick or concrete). Note: Fixings are not typically supplied, as the required type depends entirely on your building material.

3. Positioning and Fixing the Framework

• Assemble the Frame: At widths up to 1800mm, the tracks and side posts can easily be offered up to the exterior wall together as a single manageable frame.
• Level and Plumb: Use a high-quality spirit level to ensure the top track is perfectly horizontal and the side posts are perfectly vertical (plumb).
• Use Shims for Uneven Brickwork: Exterior walls and pointing are rarely perfectly flat. If your structural opening is uneven, use suitable packing shims behind the tracks. Do not bend the tracks to follow an uneven exterior wall, as this will distort the frame and cause the sliding mechanism to jam.
• Secure the Fixings: Drill pilot holes and secure the framework into the exterior masonry. Fixings should generally be spaced no more than 400mm apart, ensuring there are strong fixing points close to the corners and directly behind the locking keep.

4. Sash Installation & Locking Mechanism

• Attach the sash carrier wheels to the top track and carefully guide the lattice sash into the track system.
• Install the lock posts and slam posts according to your specific configuration.

5. Testing and Commissioning

• Clean the Tracks: Wipe the bottom track completely clean of any brick dust, swarf, leaves, or outdoor debris. Dirt in the bottom track is the single most common cause of rough or jammed operation for external grilles.
• Slide Test: Slowly slide the grille curtain back and forth. It should run smoothly along the top and bottom tracks without catching or requiring excessive force. Adjust carrier wheels if binding occurs.
• Lock Test: The lock should engage smoothly into the receiving post without needing to be forced. If the lock is stiff, double-check that your side posts are perfectly parallel.

SeceuroGuard retractable security grilles are backed by a comprehensive parts-only warranty from Samson Doors and SWS UK. This covers general product components including the fixing frame, sashes, tracks, lattice, powder-coated finish, and locking mechanisms for a period of 2 years from the date of purchase.

This warranty applies only when the product is installed, maintained, and operated according to SWS UK guidelines.

What the Warranty Covers

SWS UK will repair or replace any part found to have a manufacturing defect during the warranty period. This includes:

• Defects in materials or workmanship affecting the operation of the retractable security grille.
• Failure of the fixing frame, sashes, tracks, or lattice due to a manufacturing fault.
• Defective powder-coated finish (within the first 2 years from purchase date).
• Faulty locking mechanisms or key operation.

Please note: Labour costs, call-out fees, transport, and other associated expenses are strictly not included in this parts-only warranty.

What the Warranty Does Not Cover

This warranty does not cover damage or faults caused by:

• Incorrect installation or failure to follow SWS UK fitting instructions.
• Poor or improper maintenance, or a lack of regular servicing (e.g., allowing bottom tracks to fill with debris).
• Incorrect use or unauthorized modifications to the grille.
• Normal wear and tear, accidental damage, or malicious damage.
• Cosmetic marks or blemishes not visible from 3 metres in natural light.
• Exposure to corrosive environments, including saltwater or salty air, for products installed within 500 metres of the coast.
• Damage caused by environmental factors including extreme weather, flooding, fire, or impact.
• Products not purchased through authorized SWS UK distributors like Samson Doors.

Warranty Conditions & Insurance Compliance

To maintain the validity of this warranty:

• The SeceuroGuard grille must be installed by a competent person in accordance with SWS UK fitting instructions.
• LPS 1175 Certification: If you have purchased the insurance-approved SeceuroGuard 1001 model, it must be installed strictly according to the manufacturer's structural guidelines to maintain its official security rating.
• The product must be used for its intended purpose only.
• Regular maintenance must be carried out as per the operating and maintenance instructions provided.
• Any warranty claim must be accompanied by proof of purchase showing the date of purchase.

Making a Warranty Claim

If you believe your SeceuroGuard grille has a manufacturing defect covered by this warranty, please contact Samson Doors with your product details, proof of purchase, date of installation, and a clear description of the fault. We may request photographs or arrange an inspection to assess the claim. If the claim is valid, we will arrange for the repair or replacement of the defective part(s).

Please retain your proof of purchase and warranty documentation for future reference.

Exclusions and Limitations

• This warranty is non-transferable and applies only to the original purchaser.
• SWS UK reserves the right to repair or replace defective parts at its discretion.
• Repaired or replaced parts carry a warranty for the remainder of the original warranty period or 12 months, whichever is longer.
• SWS UK and Samson Doors will not be liable for any consequential loss, damage, or expenses arising from product failure.
• This warranty does not affect your statutory rights under UK consumer protection legislation.

How to Measure for an External SeceuroGuard 1000 Door Grille (Max 1800mm W x 2500mm H)

Accurate measuring is the most critical step when ordering your retractable security grille. We always recommend using a sturdy metal tape measure and taking your measurements in millimetres (mm) for the highest accuracy.

Because you are fitting this grille externally over a doorway, thoroughly check the exterior brickwork for any obstructions such as outdoor lighting, drainpipes, deep pointing, or uneven rendering that might interfere with the tracks sitting flat against the wall.

1. The "Overall Size" Rule

Important: SeceuroGuard grilles are always ordered by their Overall Width and Overall Height. This means the dimensions you provide will be the exact physical size of the manufactured product, including the entire surrounding outer framework and tracks, not just the sliding grille curtain.

2. Measuring for an External Face Fit (Outside the Doorway Recess)

A face fit means the grille will be installed directly onto the exterior wall face, overlapping the structural doorway opening. Because it sits on the wall, your ordering dimensions will need to be larger than the doorway opening itself to ensure a clear walk-through space.

When calculating your external face fit sizes, you must add the following to your clear doorway opening dimensions:

• The Sash (Bunch) Size: When the grille is fully opened, the metal lattices bunch together at the side. This bunched sash takes up approximately 15% of the total order width. To ensure the bunched grille clears your doorway completely (allowing a full, unobstructed walk-through), you must add this 15% bunch size to your structural doorway width.
• The Locking Post: Allow additional width on the locking side so the post sits securely on the brickwork.
• The Top Track: Ensure you have enough flat, unobstructed exterior wall space directly above the doorway lintel to accommodate the top track height.
• The Bottom Track (Trip Hazard Warning): For doorways, we strongly recommend specifying an optional folding or removable bottom track so you do not create a permanent trip hazard across the threshold. Calculate your overall height from the floor level up to the top of where the top track will sit.

See our Comprehensive Guide to Measuring for Security Grilles >

Bunch (Sash) Sizes and Locking Options

Use the chart below to calculate exactly how much space the bunched sash will take up when the SeceuroGuard grille is fully open. This is particularly important for external doorways where maximum walk-through space is required for access or moving large items.

Please Note - Locking Restrictions: The minimum grille height required to accommodate the upgraded 4-point locking system is 1000mm. While most doorways easily exceed this, please note that any grille ordered below 1000mm in height can only be manufactured with a standard 2-point locking system.