Sws seceurodoor 75 traditional single phase 240v tube motor 20swg steel steel steel roller shutter doors

SeceuroDoor 75 Traditional EVO 20 Gauge Electric Tube Motor Roller Shutter

The 20 gauge version of the SeceuroDoor 75 Traditional EVO delivers a heavier duty steel curtain for commercial and industrial environments that require enhanced security and the ability to span wider openings. This model provides an exceptionally robust physical barrier while relying on a compact single phase 240V electric tube motor, which is housed neatly within the barrel to keep the operating mechanism protected and visually unobtrusive.

Because electric tube motors are engineered for low to medium daily use, this shutter is an incredibly cost effective solution for premises requiring roughly 10 to 20 operating cycles per day. It is a highly popular choice for securing factory workspaces, farm buildings, retail units and independent workshops. If your site involves continuous intensive operation or extremely high traffic, we advise looking at our heavier duty direct drive or chain drive motor options.

To ensure your premises remain accessible during a power cut, an internal manual override system is included as standard. A winding handle engages securely below the curtain on the motor side, allowing your staff to safely raise or lower the door by hand during an emergency.

EVO Upgrades for Faster Installation

The manufacturer has entirely overhauled the SeceuroDoor 75 EVO assembly process to guarantee a faster installation and a superior final finish. The practical engineering improvements include:

• Laser Cut End Plates: Non handed, universal plates make site alterations and post survey adjustments much simpler.
• Weld Free Assembly: By bolting the end plates instead of welding them, the protective zinc coating remains perfectly intact, drastically boosting long term corrosion resistance.
• Twin Hole Adaptor Plates: Upgraded adaptors provide dual fixing points to simplify any future motor modifications or maintenance.
• Strengthened Anti Climb Hood: Redesigned with additional folds for extra rigidity and extended by 2 mm on either side to better cover the end plates and prevent water ingress.
• Fitter Friendly Tolerances: Enhanced manufacturing precision significantly cuts down the time required to tune and align the door on site.

UK Manufacturing and Compliance

Every SeceuroDoor is made to measure in the UK within ISO 9001 and ISO 14001 certified facilities, ensuring strict environmental and quality management standards. Custom sizing guarantees a perfect fit without the security compromises associated with cutting down stock sized shutters. The products are fully CE or UKCA marked to comply with all current European and UK regulations for commercial powered doors.

20 Gauge Curtain Construction

This specific specification utilises a 20 gauge single skin galvanised steel curtain built from the traditional 75 mm scrolled slat profile. This thicker steel gauge provides a noticeable increase in impact resistance compared to the lighter 22 gauge model, and allows the shutter to securely cover larger openings up to 7000 mm wide.

If your budget is tighter and the opening is smaller than 5000 mm, the lighter 22 gauge version is available. Conversely, an even stronger 18 gauge option can be quoted for extreme security requirements. We can also incorporate perforated or vision slat profiles into the curtain to provide up to 25 percent visibility when back lit, which is highly requested for retail display environments.

Colour Finishes

The standard industrial finish is hard wearing galvanised steel for the curtain and guides. However, we can powder coat the entire shutter system to almost any standard BS or RAL colour to match your corporate branding or existing building aesthetics. For particularly demanding environments, durable textured plastisol coated finishes are also available.

Motor and Operation Controls

The standard single phase 240V tube motor offers simple push button convenience and can be integrated with a wide variety of access control devices. Depending on your site risk assessment, safety features like hold to run controls or safety edge sensors must be specified to ensure safe daily operation.

For smaller doorways where an electrical supply is unavailable, a manual spring and lock alternative can be manufactured. This uses a counterbalanced torsion spring for easy manual lifting, though it is strictly limited to shutters under 2800 mm high due to the physical weight of the 20 gauge steel.

Key Performance Data

If your site suffers from high wind exposure or requires a shutter exceeding 35 square metres, our team can recommend alternative guide setups or heavier duty motor solutions from the wider SeceuroDoor range.

SeceuroDoor 75 Traditional EVO Specification

Traditional EVO Build Overview

This model features the newly upgraded Traditional EVO build specification. While it retains the robust steel guides, steel track angles and steel end plates that the traditional industrial design is known for, the EVO iteration introduces several advanced fitter friendly features. These include universal laser cut end plates with weld free bolted construction, twin hole motor adaptor plates for easier maintenance, and an enhanced anti climb hood design that provides superior water protection and rigidity.

These engineered upgrades deliver a faster, more precise installation and a much cleaner final finish. For full details on the differences between Traditional and Continental build specifications, click here.

Motor Control Options

The electric tube motor can be operated via two primary control methods, allowing you to select the best balance of convenience, safety and cost for your specific application:

1. Hold to Run (Deadman) Control – Standard

The most basic and cost effective method is an internal wall mounted push button station with hold to run logic. You stand and hold the button firmly for the duration of the opening or closing cycle. With this method, no safety edge or beam systems are legally required, keeping the costs to a minimum and electrical components simple.

Note: This method requires alternative access to the building (e.g. a personnel door) as the control is internal.

2. Remote Control Operation

For greater convenience, a wall mounted control panel with wireless remote control capability is available. This package typically includes:

• Control Panel: Wall mounted unit with integrated receiver.
• Handsets: Supplied with two remote control handsets as standard (additional handsets available on request).
• Safety Edge System: Wireless safety edge detection built into the bottom T rail section to instantly stop if an obstacle is met during operation.
• Additional Safety (Recommended): If the door opens onto a public pathway, road or high traffic area, we strongly recommend adding infra red photo beams to further enhance safety by detecting obstructions before contact is made.

Finish and Colour Options

The SeceuroDoor 75 Traditional EVO curtain is available in three primary finish types to suit aesthetic requirements and budget:

Galvanised Steel (Standard)

As standard and used by many customers, the steel curtain can be supplied in its natural galvanised steel finish. This is a robust, industrial finish used widely where function is the priority over colour matching, depending on the roller door location.

Powder Coated

For corporate branding or architectural blending, the curtain can be polyester powder coated to almost any RAL or BS colour. This process provides a durable, high quality finish that is applied to both sides of the slat, ensuring the door looks the same from the inside and outside.

Plastisol Coated

A high performance textured vinyl coating available in a range of standard colours. This finish offers excellent weather resistance and durability. Please note that Plastisol material typically features the coloured finish on the external face only, with a standard off white internal paint finish.

Custom Colour Options

We can offer the door in special colours other than those shown in our online shop options. You can also mix and match the guides, hood cover and curtain colours if required. Please email enquiries@samsondoors.co.uk or call 01933 448 850 for details and bespoke pricing.

Full installation details are provided with every door.

Professional Installation for Higher Specification Doors

While smaller, manually operated industrial roller doors can often be installed by competent builders, our higher specification and larger sized doors require specialist knowledge. High speed motors, advanced access controls, three phase operating systems, and certified security ratings demand precise setup and commissioning. For these advanced models, Samson Doors strongly recommends installation by trained, experienced professionals.

Incorrect fitting of a heavy, higher specification door can compromise its certified security rating, void the manufacturer warranty, and create serious safety risks in a working environment. A professional installation ensures that heavy duty side guides are securely fixed to the correct building structure, the curtain is perfectly tensioned, all complex safety devices are fully operational, and the motor is legally compliant with UK health and safety regulations.

Tell Us About Your Project

Every opening is different, and the best way to ensure you get the right door at the right price is to share as much detail as possible from the outset. If you have any photographs, sketches or drawings of your opening where the doors are required, please send them to enquiries@samsondoors.co.uk along with the following information:

• Rough opening width and height measurements.
• Expected number of operations per day.
• Number of users and the type of door controls required.
• Performance expectations such as security rating, insulation, wind loading or operating speed.
• Any specific colour or finish requirements.

From this information our team can suggest the best model and specification for your application and provide accurate pricing. The more detail you can share, the faster and more precisely we can help. Call us on 01933 448 850 or email enquiries@samsondoors.co.uk to get started.

SeceuroDoor Product Warranty

All SeceuroDoor products, including the industrial motor, are guaranteed against defects of material or workmanship by SWS UK, subject to correct installation, maintenance and operation, for a period of 1 year from the date of purchase. This comprehensive warranty provides peace of mind and protection for your investment in premium industrial door solutions.

Extended Warranty for GfA Motors

An exclusive extended 2-year warranty is available on GfA industrial motors when you register each drive using the GfA bluetooth dongle. Registration is straightforward and provides additional benefits including viewing and tracking all registered GfA assets in one place, monitoring ongoing usage patterns, keeping track of drive settings over time, accessing a comprehensive library of fault codes, and synching your service records.

Warranty Coverage

SWS UK will replace or repair any components of our products where the manufacturing process has resulted in a defect occurring during the relevant warranty period, subject to the exceptions and conditions detailed below. For all replacement electrical parts, the warranty period is 12 months or the remainder of the original warranty period, whichever is the longest.

Warranty Limitations and Exclusions

The SeceuroDoor warranty does not cover the following circumstances:

Visual Quality Standards

• Marks, distortion, stains, blemishes, indentations or scuffs which are not observable from at least 3 metres away in natural light (not direct sunlight)
• Minor variations in finish associated with the manufacturing process
• Impact damage or scratches, dents, scuffs or other minor abrasions occurring post-installation

Installation and Maintenance Issues

• Incorrect installation of the product, not following SWS UK's installation instructions
• Incorrect operation of the product or lack of proper care and maintenance in accordance with SWS UK's Operating & Maintenance Manual
• Any modifications made to the product by anyone other than SWS UK
• Use or attempted use of non-SWS UK spare parts
• Repairs or attempted repairs undertaken by any person other than someone specifically authorised by SWS UK
• Any attempt to reduce operating clearances by means of infills or draughtproofing

Normal Wear and Environmental Factors

• Normal wear and tear from regular usage
• Accidental or malicious damage from third parties
• External influences such as extreme or abnormal weather conditions, fire, water, salts, chemicals and bird droppings
• Any fault or surge in the customer's electricity supply
• Any failure of masonry or other structures onto which the product has been fixed

Coastal and High-Corrosion Environments

• Rust or corrosion caused by exposure to saltwater or salty air for products installed within 500 metres of the sea or a large body of saltwater
• For products installed within 2 miles of the sea, the exterior finish of the product is guaranteed for a limited period of 2 years only (regular weekly cleaning with warm water and mild detergent is essential)

Consumables and Consequential Costs

• Consumable items such as fuses, light bulbs or batteries
• Indirect, special or consequential loss or damage howsoever caused, including remedial work costs, call-out fees, tool or plant hire and transport costs

Important Warranty Conditions

The SeceuroDoor warranty covers parts only and does not cover labour costs or consequential costs. This includes but is not limited to call-out fees, transport costs and costs for remedial work for removing and/or re-installing faulty parts. All warranty claims must be reported promptly to allow for timely assessment and resolution.

Product Care Requirements

To maintain warranty validity and prolong the life of your SeceuroDoor product, correct operation and care in accordance with the official Operating & Maintenance Manual is essential. Regular maintenance includes wiping with a damp cloth and mild detergent to remove excessive dirt and grime, ensuring the floor is kept smooth, level and clear of dirt and debris which can damage the rubber seal, and conducting visual inspections to identify any issues before they develop into major problems.

Coastal Installation Requirements

Products installed in coastal environments or high-corrosion areas require enhanced maintenance protocols. Regular cleaning of products in locations within 2 miles of the sea is especially important. Doors should be cleaned thoroughly weekly using warm water and mild detergent with a soft cloth or sponge, allowed to dry naturally. Never use strong detergent, abrasive, caustic or solvent-based cleaners as these will void the warranty.

Visual Quality Assessment Standards

We recommend performing a visual quality check on installation. Carry out the quality check in natural daylight, not direct sunlight. Stand at a distance of 3 metres from the product to view the overall appearance. The product is acceptable if, taking into account the manufacturing process, none of the following is readily visible on the face of the product: marks or distortions associated with the manufacturing process, minor indentations, marks or scuffs on the surface, or paint or stain blemishes.

Making a Warranty Claim

For warranty claims or technical support, please contact Samson Doors on 01933 448 850 or email enquiries@samsondoors.co.uk. Please have your order details, installation date, and a clear description of the issue available. Our technical team will assess the claim and arrange appropriate resolution in accordance with the warranty terms.

Protecting Your Investment

Regular professional servicing and maintenance by qualified engineers will help ensure optimal performance and longevity of your SeceuroDoor product. Samson Doors offers comprehensive maintenance contracts and emergency repair services across the UK to keep your industrial doors operating reliably year after year.

Measuring Guide for SeceuroDoor 75 Traditional Roller Shutters

Understanding Ordering Dimensions

The measuring, pricing and ordering dimensions for any electric roller shutter door with an electric tube motor drive are based on the OVERALL WIDTH and OVERALL HEIGHT, including the guides for the width and endplates for the height. This measurement principle applies regardless of whether the door is a Continental or Traditional build arrangement.

Key Measurement Rules:

• OVERALL WIDTH (including guides) = Ordering Width
• OVERALL HEIGHT (including endplates) = Ordering Height

See diagram below for visual reference.

Traditional vs Continental Build Differences

The Traditional build roller door arrangement uses heavier duty steel guides with steel angle sections in the setup, whereas the Continental build roller doors use aluminium guides. Traditional build doors can generally accommodate larger sizes and offer more adaptation options with the guides and track fixing angles, particularly useful when dealing with more challenging installation scenarios.

Both door build types have the guides, endplate and optional roll hood cover fitted within the dimensions of the external endplate dimensions.

Important Height Considerations

The endplate and hood cover size will vary depending on the height of the door, so please be aware to check the drive-through height and endplate size if your dimensions are critical. Always allow for the physical size of the rolled curtain and endplate assembly when calculating available headroom.

Installation Methods

Face Fit - Behind the Opening

Most roller shutter doors are installed to the inside face of the aperture. In a perfect scenario, your daylight opening dimensions are the space between the guides and underneath the endplate dimensions. However, it is important to note that any roller shutter will always have a 'hang down' when opened fully, making the final drive-through height slightly less than the height of the guides.

This hang down is normal and varies on different models depending on the curtain specification and roll size. If your opening drive-through height is critical, please speak to us first to determine the best height to order for your specific application.

Reveal Fit - Between the Opening

Some roller shutter doors are installed between the aperture opening (reveal fit), and this is where the electric tube motor roller door arrangement works particularly well, as all components are positioned inboard from the ordering dimensions, creating a neat flush finish.

You can install any roller shutter door between an opening, but please note that industrial motor-driven models may require some additional steelwork or sub-framing to make them fit between the reveal properly and securely.